Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-20-2019, 11:01 AM   #21
Phil Gillespie
Senior Member
 
Phil Gillespie's Avatar
 
Join Date: Sep 2011
Location: Christchurch New Zealand
Posts: 1,004
Default Re: 39 Coupe Broken Axle Removal.

So just checking again and it would appear the inner axle seals which sit in behind the bearings are not fitted? The bearing is located in a recess at bell but the inner seal when fitted is located how? Does it just sit on the axle as there is no shoulder to locate?
Have read the Ford Bulletin and past posts and understand sharp edge to diff to retain oil.
Phil NZ
Phil Gillespie is online now   Reply With Quote
Old 06-21-2019, 03:37 PM   #22
36coupe
Senior Member
 
36coupe's Avatar
 
Join Date: Oct 2012
Location: NovaScotia
Posts: 513
Default Re: 39 Coupe Broken Axle Removal.

Best part of using a port-a-power is you can position yourself out of ‘the line of fire’ while spreading the spring.
__________________
Regards,
Lindsay
36coupe is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 06-21-2019, 03:41 PM   #23
ford38v8
Senior Member
 
ford38v8's Avatar
 
Join Date: Jul 2011
Location: SF Bay Area
Posts: 4,984
Default Re: 39 Coupe Broken Axle Removal.

Quote:
Originally Posted by 36coupe View Post
Best part of using a port-a-power is you can position yourself out of ‘the line of fire’ while spreading the spring.
Or you can have a cold one while you instruct your wife how to do it.
__________________
Alan
ford38v8 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:52 AM.