|
06-02-2018, 02:20 PM | #1 |
Senior Member
Join Date: May 2010
Location: 60615,330th Ave.,Clare, Iowa, 50524
Posts: 1,457
|
Machine Videos
There are some Machine Videos of this machine Shop doing a Model A, or B, Ford.
Comments Please! https://www.youtube.com/watch?v=rDD78ADKP_w |
06-02-2018, 02:50 PM | #2 |
Senior Member
Join Date: May 2010
Location: brentwood, ca
Posts: 4,240
|
Re: Machine Videos
Crank grinding one was revitting.
Saw a recent build and owner ordered a second right away. Said it ran like a Swiss watch. However, when towed on a dolly in gear the first engine took out #1 cylinder. |
Sponsored Links (Register now to hide all advertisements) |
|
06-02-2018, 11:17 PM | #3 |
Senior Member
Join Date: May 2010
Location: brentwood, ca
Posts: 4,240
|
Re: Machine Videos
Well maybe I should watch the video first, assumed it was of your video.
|
06-02-2018, 03:33 PM | #4 |
Senior Member
Join Date: May 2010
Location: Dallas TX
Posts: 112
|
Re: Machine Videos
Where is the head and block resurfacer. Where is the boring bar, who chases a cylinder bore on mill. Needs sleeve and valve seat installed. Forget about boring oversize, let's just hone it dry, it cuts faster. We dont own a cylinder honing machine, or boring bar. It's a blue printed "race block". I'm sure I saw a positive pressure clean room for assembly, didn't you? You saw in on the Internet, it must be true.
__________________
Remember when flying low inverted, down is up, and up can be expensive. |
06-02-2018, 04:58 PM | #5 |
BANNED
Join Date: Sep 2017
Posts: 385
|
Re: Machine Videos
Better off using a file !!
|
06-02-2018, 06:20 PM | #6 |
Member
Join Date: Aug 2014
Location: Grand Rapids MI
Posts: 45
|
Re: Machine Videos
Sponsored Links (Register now to hide all advertisements)
|
06-03-2018, 01:53 PM | #7 |
Senior Member
Join Date: May 2010
Location: Wa.
Posts: 5,408
|
Re: Machine Videos
Mickey Mouse was a piker compared to those guys.
|
06-03-2018, 03:46 PM | #8 |
Senior Member
Join Date: May 2010
Posts: 2,595
|
Re: Machine Videos
...
Last edited by Benson; 06-03-2018 at 06:41 PM. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|