32 parts....

[jim1932]

Thought I would post my latest list of needs for my 4 cylinder tudor:
1932 locking hubcap (or just a lock with a key for my 34 locking hubcap)
inside door and window handles (need one each but will take more)
Bumpers (only original, straight and no welds)
Driver front shock in rebuildable condition
fuel pump shaft that holds diaphram
carb throttle and choke shafts.

Thanks, PM me with price shipped if you have any.

[jim1932]

Still looking. Need Shocks too.

[jim1932]

would also like old but original pedal pads

[twinjoan]

I( have some NOS genuine Ford Pedal Pads but they are not for the faint of heart, I assume these would be used for competition only. I may have some old used ones, I'll look around. I shall also look for the locking hub cap, lock cylinder and keys. My email address is [email protected]. Elmer Swift 805-646-6440 or 805-458-0128

[twinjoan]

I did not find any used genny Ford pedal pads, all I have is a pair of NOS at $150.00. Moving on I have a spare lock assembly that I would Take out of a 34 locking hub cap. I want $80. for the lock cylinder only with one original key and 2 repos. I will sell the entire hub cap for $120.. It is a really nice one. Pictures on request. If you can use a lock assembly without key, I have one for $40.00. Elmer Swift

[jim1932]

Sponsored Links (Register now to hide all advertisements)

Still looking for shocks and bumpers and a spare tire lock (early) not the locking hubcap. And Carb throttle and choke shafts

[pauln]

i have a nice locking hub cap and kies 100,00 603 332 6266

[jim1932]

Originally Posted by Andy

There is a spare tire strap and lock assy on that site now. $60 the last I looked. Look under Hurd.

Shh don't tell anyone I am wathcing that one...{but thanks}

[Andy]

What brand of carb parts are you looking for? I have a few Detroit Lub. carbs. I could rob some parts or sell you one of them but they don't use choke shafts.

[jim1932]

Zenith

[jim1932]

Still looking for 32 Shocks, origonal bumpers, handles and window cranks and Zenith Carb shafts.

[v8fordman]

I have a lock with key for your locking hub cap. Price is $65 plus shipping. This is a nice piece.

[Andy]

All the parts for a 32 Zenith carb are found in Model A catalogs. Same stuff. I am ordering almost a whole carb in parts to rebuild one for a friend,

[jim1932]

Originally Posted by Andy

All the parts for a 32 Zenith carb are found in Model A catalogs. Same stuff. I am ordering almost a whole carb in parts to rebuild one for a friend,

The throttle and choke shafts are the same? Those are the main parts I am after.

[jim1932]

Originally Posted by v8fordman

I have a lock with key for your locking hub cap. Price is $65 plus shipping. This is a nice piece.

Sorry I have backed off on the locking hubcaps. I determined they came out later in the year and my car is an early model.

[Andy]

Originally Posted by jim1932

The throttle and choke shafts are the same? Those are the main parts I am after.

I really hate it when some uninformed nut advises wrong info. I am now one of them. The Zenith III looks the same as the earlier models but the choke and throttle bores are bigger. I am very sorry to have missled you.

[DavidG]

Andy,

Most of the jets are unique also.

David

[DavidG]

Jim,

I assume from your earlier photos that the interior door and window crank handles are the last '32 version without any point on the end that attaches to the mechanisms in the door, correct? If so, are you looking for useable originals or correct reproductions (which do exist)? Please advise as I may have some spare useable originals.

Dave

[jim1932]

Dave, I don't have either inside door handle that is correct for the car so as long as the 2 are the same, it doesn't matter. I could use the escrutchens too.

Here is a picture of my window crank handle: