05-28-2015, 08:51 PM | #1 |
Senior Member
Join Date: Jan 2015
Location: San Angelo Texas
Posts: 112
|
Build date
I have a 1928 Tudor. I've seen where there is or can be a build date in the gas tank. Is this only on some of them and where is it located. I have three different gas tanks and haven't found a build date on any of them. Thanks. Jim
|
05-28-2015, 08:57 PM | #2 |
Senior Member
Join Date: Apr 2015
Location: Boise, Idaho
Posts: 1,578
|
Re: Build date
I've read where the date is stamped on the tank assembly, directly above the steering column, just above the bolted together seam. It's on the engine side of the tank assembly. Mine is a little outboard of that location, just above the seam..but also I've seen that not all tanks were stamped..
|
Sponsored Links (Register now to hide all advertisements) |
|
05-28-2015, 08:58 PM | #3 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: Build date
take a look at plucks site
here is a link to his gas tank research http://www.plucks329s.org/gastank.htm |
05-29-2015, 02:00 PM | #4 |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: Build date
"MAYBE" some tanks were replaced when OEM tanks were still available?
__________________
"THE ASSISTANT GURU OF STUFF" |
05-29-2015, 07:08 PM | #5 |
Senior Member
Join Date: May 2010
Location: Marengo. Illinois
Posts: 262
|
Re: Build date
Not all have the dates on the firewall, but most have them.
|
05-29-2015, 07:23 PM | #6 |
BANNED
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
|
Re: Build date
Sponsored Links (Register now to hide all advertisements)
Yes, within this time frame, there are tanks with no date. Thanks Mitch for directing those who want to know to my site about the gas tanks. Pluck |
05-29-2015, 10:21 PM | #7 |
Senior Member
Join Date: Jan 2015
Location: San Angelo Texas
Posts: 112
|
Re: Build date
Thanks to Steve and all who responded. Steve has a lot of information as do a lot of other guys. As a new owner of a model A and with all the drama I sometimes read, I want to thank the guys who really have taught me what little I know. I will pass what I have learned on to the newer guys. If I ever stick my foot in my mouth or offend anyone please accept my apology and know it was unintentional Sincere thanks
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|