|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-30-2016, 01:58 PM | #1 |
Senior Member
Join Date: May 2012
Location: Chillicothe, Missouri
Posts: 1,175
|
Years Powerhouse Generator Used
I have a 1928 Roadster Pickup.
It currently has the long cylinder shaped Generator. I believe to be correct, my Truck should have the Short Powerhouse Generator. I have read that the Powerhouse Generator was used from the beginning thru early 1929. Is this correct? I purchased a used (Obviously) working Powerhouse Generator for $80.00. Is there anything Special to look for on these other than the obvious burnt field windings, commutator and bare wires?
__________________
"If I asked people what they wanted they would have said faster horses." -Henry Ford "Primitive technology is not a design flaw" 1928 Ford Model A Roadster Pickup 1930 Gordon Smith Air Compressor 1941 Willy's Pickup 1960 Thunderbird-For Sale 1964 Buick Riviera 2x4 425 1965 Pontiac GTO, 455 Super Duty 2004 Dodge Ram SRT-10, V-10 Viper 1977 Charger Jet Boat,460 Ford,Jacuzzi Jet Front Engine Nostalgia Dragster,Supercharged 296 "Fullrace Flathead" Ford Engine Build up on DVD ask |
05-30-2016, 03:30 PM | #2 |
Senior Member
Join Date: Jul 2014
Location: Danbury Ct
Posts: 1,254
|
Re: Years Powerhouse Generator Used
If you find you need them, I have a set of field coils for the powerhouse generator.
|
Sponsored Links (Register now to hide all advertisements) |
|
05-30-2016, 11:44 PM | #3 |
Senior Member
|
Re: Years Powerhouse Generator Used
Style P2 - Used through September 1928. It was also
a 5 brush unit with cutout on the side and used with engine built through April 1928. Thereafter the cutout was on the top. The steel back cover was cadmium plated through early 1928 and black thereafter. The generator was mounted with a 1/2” screw through the front timing gear cover, which threaded into a forged single tab generator bracket. A 1/6" thick and 7-1/4” long cadmium plated adjusting arm extended from a two screw side bracket. To a special stud. stud. A leather washer was used between the adjusting arm and the bracket. Style P3 – Used from from October 1928 through July 1929. It was a 3-brush unit with cutout on the top and a steel back back cover painted black. It was mounted the same as Style P2 but with a malleable cast mounting bracket and it had no adjusting arm.
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
05-31-2016, 03:31 AM | #4 |
Senior Member
Join Date: May 2012
Location: Chillicothe, Missouri
Posts: 1,175
|
Re: Years Powerhouse Generator Used
Sponsored Links (Register now to hide all advertisements)
I'm still waiting on the generator to arrive in the mail. Pgerharte I'll keep your Field Coils in mind as I may need them. I'm told the generator spins when hooked up to 6 volt battery. I have a growler and armature lathe but hopefully they will not be needed. Thanks again to both Model A Men!
__________________
"If I asked people what they wanted they would have said faster horses." -Henry Ford "Primitive technology is not a design flaw" 1928 Ford Model A Roadster Pickup 1930 Gordon Smith Air Compressor 1941 Willy's Pickup 1960 Thunderbird-For Sale 1964 Buick Riviera 2x4 425 1965 Pontiac GTO, 455 Super Duty 2004 Dodge Ram SRT-10, V-10 Viper 1977 Charger Jet Boat,460 Ford,Jacuzzi Jet Front Engine Nostalgia Dragster,Supercharged 296 "Fullrace Flathead" Ford Engine Build up on DVD ask |
|
|
Sponsored Links (Register now to hide all advertisements) |
|