|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-23-2019, 10:05 AM | #1 |
Senior Member
Join Date: May 2010
Location: SPEEDWAY INDIANA
Posts: 4,148
|
Thanks Third Generation Automotive!!!
I have been using the new Crab Distributor plate and had ran out, Mike didnt have any more. He mailed me last week as he had found a new supply.
What a time saver , comes with new bushing and spring contact. I use the Napa Echlin contact set , works great but requires some alignment on the drivers side set ..... Last edited by BUBBAS IGNITION; 10-23-2019 at 10:11 AM. |
10-23-2019, 05:10 PM | #2 |
Senior Member
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
|
Re: Thanks Third Generation Automotive!!!
Thanks Jim! I have on a couple of them, had to peen the edge of the plate opposite of the wire terminal, as some of them are slightly too small OD and the wire ternimal was pushing it over slightly. A quick peen with a chisel and all is well.
PS I am having a small batch of the plate bushings only made and I'll mail you up a few so you can fix the worn originals you have.. |
Sponsored Links (Register now to hide all advertisements) |
|
10-23-2019, 05:28 PM | #3 | |
Senior Member
Join Date: May 2010
Location: SPEEDWAY INDIANA
Posts: 4,148
|
Re: Thanks Third Generation Automotive!!!
Quote:
|
|
10-24-2019, 07:23 AM | #4 |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
|
Re: Thanks Third Generation Automotive!!!
It's great to see our good suppliers/dealers working together for the common cause of keeping "us, ....their customers", happy. This type of thing is a "win/win" for all of us!!
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein |
10-25-2019, 09:32 AM | #5 |
Senior Member
Join Date: May 2010
Location: SPEEDWAY INDIANA
Posts: 4,148
|
Re: Thanks Third Generation Automotive!!!
Thanks JM for the comments. I have always tryed to work with my competition saying i dont have any competition. Just industry friends !!!.
Mike at Gen 3 purchased one of my first electronic crabs ( before anyone else made them) Installed it in the parking lot at Auburn and drove it home , we have been friends ever since.. |
10-25-2019, 02:05 PM | #6 | |
Senior Member
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
|
Re: Thanks Third Generation Automotive!!!
Sponsored Links (Register now to hide all advertisements)
Quote:
Jim, I remember that well, and it is hard to believe that was 8 years ago. While I'm just a very small vendor, what I like about this hobby is that many vendors work together and Don't consider each other competition but rather a support group.When the V-8 Club has over 7,000 members there is plenty of business to spread out among all the great suppliers we have. |
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|