Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 02-09-2019, 11:40 AM   #1
4ever18
Junior Member
 
4ever18's Avatar
 
Join Date: May 2010
Location: Kingsport, TN 37664
Posts: 14
Default 1933 Ford Front Spring Perch -Original

Several months ago, I was fortunate to become the next caretaker of a '33 3 window coupe. This car hadn't been out of the garage in 41 years. When checking out my new family member, I discovered that the axle, wishbone, and spring perches had been welded together. I've disassembled the front suspension and discovered that the perches are badly worn and need to be replaced. I've found reproduction '32 versions, as well as 1935/48 versions, but none labeled as fitting a '33. The photos of the '32 versions appear similar to the '33 versions. Will the '32 versions work (my car still has the original style front shock absorbers)? Or, is there a source for replacement '33 versions and I've just not found them?

Thank you for your advice and assistance.
Attached Images
File Type: jpg '33 Fotrd 3 Window Coupe 04.jpg (20.0 KB, 115 views)
File Type: jpg '33 Fotrd 3 Window Coupe 19.jpg (19.9 KB, 106 views)
4ever18 is offline   Reply With Quote
Old 02-09-2019, 11:44 AM   #2
Bob C
Senior Member
 
Join Date: May 2010
Location: So Cal
Posts: 8,742
Default Re: 1933 Ford Front Spring Perch -Original

The parts book shows Front Spring Perch 40-3030 1932-34.


Bob
Bob C is online now   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 02-09-2019, 11:50 AM   #3
4ever18
Junior Member
 
4ever18's Avatar
 
Join Date: May 2010
Location: Kingsport, TN 37664
Posts: 14
Default Re: 1933 Ford Front Spring Perch -Original

Thank you, Bob C.
4ever18 is offline   Reply With Quote
Old 02-09-2019, 12:57 PM   #4
petehoovie
Senior Member
 
petehoovie's Avatar
 
Join Date: May 2015
Posts: 8,078
Default Re: 1933 Ford Front Spring Perch -Original

It sure does look like a '34 in the two pictures you posted....
__________________
The only thing nice about being imperfect is the joy it brings to others....

"Silver rings, your butt! Them's washers!"
"We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969

https://www.youtube.com/watch?v=7NReUd2_0u0
petehoovie is online now   Reply With Quote
Old 02-09-2019, 01:35 PM   #5
Mart
Senior Member
 
Mart's Avatar
 
Join Date: May 2010
Location: Solihull, England.
Posts: 8,745
Default Re: 1933 Ford Front Spring Perch -Original

Depending on how the originals are worn, they can sometimes be repaired by building up with weld and remachining back to stock dimensions. I have done it myself a couple of times, including a repair to a damaged end to the threaded portion. If the pin area is worn there is a fair chance the hole in the axle is also wallowed out oversize too. same for the tapered parts of the wishbone. All can get worn by loose pins and all can be effectively repaired given the right skills and equipment.

Mart.
Mart is offline   Reply With Quote
Old 02-09-2019, 01:38 PM   #6
DavidG
Senior Member
 
DavidG's Avatar
 
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,094
Default Re: 1933 Ford Front Spring Perch -Original

Sponsored Links (Register now to hide all advertisements)
Nice car! But, everything in your two photos indicate that it is a '34 as stated above. It might well be an early '34 model that was sold in the 1933 calendar year.


The '32 and the '33-'34 spring perches are not the same. The spring eye is slightly higher on the '33-'34 version so the two types need to be used in pairs, otherwise your car won't sit level in the front.
DavidG is offline   Reply With Quote
Old 02-09-2019, 01:46 PM   #7
Ggmac
Senior Member
 
Join Date: Jul 2016
Location: Lake worth Florida
Posts: 1,088
Default Re: 1933 Ford Front Spring Perch -Original

Strange , my 34 is the same way . Been driving it for 10 yrs like that .
Ggmac is offline   Reply With Quote
Old 02-09-2019, 02:05 PM   #8
Bob C
Senior Member
 
Join Date: May 2010
Location: So Cal
Posts: 8,742
Default Re: 1933 Ford Front Spring Perch -Original

Thanks for the correction David, I assume that is why the part number changed
from B-3030 to 40-3030.
Are there any reprints of the early V8 Service Letters?

Last edited by Bob C; 02-09-2019 at 02:20 PM.
Bob C is online now   Reply With Quote
Old 02-09-2019, 02:50 PM   #9
34billct
Senior Member
 
34billct's Avatar
 
Join Date: May 2010
Location: westport ct.
Posts: 166
Default Re: 1933 Ford Front Spring Perch -Original

A few years back BOB DRAKE had a flier about a repop. I dont know if he ever made them or just testing the waters for interest.
34billct is offline   Reply With Quote
Old 02-09-2019, 03:17 PM   #10
DavidG
Senior Member
 
DavidG's Avatar
 
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,094
Default Re: 1933 Ford Front Spring Perch -Original

Bob,


The 1932, 1933, and 1934 Service Bulletins were reprinted in their original 8 1/2" x 11" format some years ago and still may be. They show up often on ebay and on Amazon, usually inexpensively. There was a smaller (1/2 size) reproduction of all of the U.S. Service Bulletins for 1932 through 1937.



I recommend all three of the former as there is useful information for a '34 owner in all three.

Last edited by DavidG; 02-09-2019 at 03:24 PM.
DavidG is offline   Reply With Quote
Old 02-09-2019, 03:45 PM   #11
4ever18
Junior Member
 
4ever18's Avatar
 
Join Date: May 2010
Location: Kingsport, TN 37664
Posts: 14
Default Re: 1933 Ford Front Spring Perch -Original

Quote:
Originally Posted by petehoovie View Post
It sure does look like a '34 in the two pictures you posted....
The original owner installed the ‘34 hood & grill some years before parking the car in 1946.

This car has been garage kept since new. I’m it’s fourth owner. It’s never had rust or even a door ding.
4ever18 is offline   Reply With Quote
Old 02-09-2019, 03:49 PM   #12
4ever18
Junior Member
 
4ever18's Avatar
 
Join Date: May 2010
Location: Kingsport, TN 37664
Posts: 14
Default Re: 1933 Ford Front Spring Perch -Original

The car’s original owner swapped the hood & grill out in favor of ‘34 versions, prior to parking the car in 1946.

Quote:
Originally Posted by DavidG View Post
Nice car! But, everything in your two photos indicate that it is a '34 as stated above. It might well be an early '34 model that was sold in the 1933 calendar year.


The '32 and the '33-'34 spring perches are not the same. The spring eye is slightly higher on the '33-'34 version so the two types need to be used in pairs, otherwise your car won't sit level in the front.
Attached Images
File Type: jpg E435BA39-AB09-4D31-BF79-F13D8A2EC55C.jpg (20.5 KB, 30 views)
4ever18 is offline   Reply With Quote
Old 02-09-2019, 04:25 PM   #13
Bob C
Senior Member
 
Join Date: May 2010
Location: So Cal
Posts: 8,742
Default Re: 1933 Ford Front Spring Perch -Original

Quote:
Originally Posted by DavidG View Post
Bob,


The 1932, 1933, and 1934 Service Bulletins were reprinted in their original 8 1/2" x 11" format some years ago and still may be. They show up often on ebay and on Amazon, usually inexpensively. There was a smaller (1/2 size) reproduction of all of the U.S. Service Bulletins for 1932 through 1937.



I recommend all three of the former as there is useful information for a '34 owner in all three.

Thanks David I have copies of all the Service Bulletins, I was wondering about the Service Letters. I have copies of the Model A Service Letters but nothing later.
Bob C is online now   Reply With Quote
Old 02-09-2019, 07:09 PM   #14
Terry,OH
Senior Member
 
Terry,OH's Avatar
 
Join Date: May 2010
Posts: 4,743
Default Re: 1933 Ford Front Spring Perch -Original

Service letters have not been reprinted. The original used 33-34 spring perch bolts do show up especially on ebay but look them over closely because they usually have major problems. The 33-34 perch bolts are usually embossed with the part number.

Last edited by Terry,OH; 02-09-2019 at 07:18 PM.
Terry,OH is offline   Reply With Quote
Old 02-09-2019, 07:30 PM   #15
DavidG
Senior Member
 
DavidG's Avatar
 
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,094
Default Re: 1933 Ford Front Spring Perch -Original

The service letters have never been reproduced commercially for the period in question, the same for the general letters to dealers and the letters to the assembly plants.


Copies of the former that exist come from the files of dealers who did not clean out their files periodically (thank goodness!) or from Ford's archives in the case of all three types of letters.
DavidG is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 05:52 PM.