|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-22-2021, 07:39 PM | #1 |
Senior Member
Join Date: May 2010
Location: 215 E. 6th Street Northport, Michigan 49670
Posts: 941
|
Coil Question/Not starting
We have a 30' Roadster high point car in the shop that won't start. Within a few seconds of turning the engine to start, the coil gets so hot it can not be touched.
I have 6volts at the end of the ignition cable, and 6 volts at the points. But no spark at the plugs. My thoughts are that the condenser is bad, and probably the coil because of severe overheating. Anyone have any thoughts??
__________________
Bob from Northport Northport, Michigan |
08-22-2021, 08:04 PM | #2 |
Senior Member
Join Date: Apr 2019
Location: Mt. Pleasant, SC
Posts: 601
|
Re: Coil Question/Not starting
Sounds like there is an issue with the coil. I would swap it with a known good one.
Good luck - Jim |
Sponsored Links (Register now to hide all advertisements) |
|
08-23-2021, 01:55 AM | #3 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: Coil Question/Not starting
Put an Ohm meter across the terminals and let us know the result.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
08-23-2021, 07:40 AM | #4 |
Senior Member
Join Date: Sep 2020
Location: Syracuse, NY
Posts: 173
|
Re: Coil Question/Not starting
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|