Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 07-04-2010, 08:47 PM   #1
gearheadbill
Senior Member
 
gearheadbill's Avatar
 
Join Date: May 2010
Location: Snohomish, WA
Posts: 375
Default 1932 sedan beltline

I'm probably looking for the impossible but....is there someone who has a real roached out sedan body where the beltline under the rear window (and wrapping partially around to the 1/4's) isn't too bad and would be willing to sell it to me? I am beginning to do repairs to my phaeton. This beltline has some splits/tears in it but the metal is SO thin that I really should replace a couple of small sections of that beltline. I have visually compared the one on the phaeton with one on my Tudor and they're pretty darn close to the same shape. Thanks! You never know.

I'll place the same post in the WANTED Classifieds in case this thread is in the wrong place. Thanks again.
gearheadbill is offline   Reply With Quote
Old 07-08-2010, 06:54 PM   #2
Chisel
Senior Member
 
Join Date: May 2010
Posts: 232
Default Re: 1932 sedan beltline

Don't look like you got any help. There are a couple good metalshapers in the Seattle area that could shape any panel you need.
Chisel is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 07-09-2010, 12:34 AM   #3
Jason M.
Senior Member
 
Jason M.'s Avatar
 
Join Date: May 2010
Location: Lower Mainland B.C. Canada
Posts: 125
Default Re: 1932 sedan beltline

This 32 tudor is sitting probably 4hrs from Snohomish in B.C. Not much left but a good chunk of floor. I am unsure if it is available or not. Jason...
Attached Images
File Type: jpg eastdeuceback.jpg (105.4 KB, 31 views)
File Type: jpg eastdeuceL.jpg (114.5 KB, 30 views)
File Type: jpg eastdeuceR.jpg (114.9 KB, 32 views)
Jason M. is offline   Reply With Quote
Old 07-09-2010, 01:51 AM   #4
Comet
Member
 
Comet's Avatar
 
Join Date: May 2010
Location: Charleston, SC
Posts: 59
Default Re: 1932 sedan beltline

Find someone with a Pullmax and have it made if you can't find a roached out car.
Comet is offline   Reply With Quote
Old 07-09-2010, 09:14 AM   #5
gearheadbill
Senior Member
 
gearheadbill's Avatar
 
Join Date: May 2010
Location: Snohomish, WA
Posts: 375
Default Re: 1932 sedan beltline

Thanks for the replies. After posting I took another look at it and decided that I can make the pieces that I need. Only need 2 pieces less than 6" long.
gearheadbill is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:04 AM.