Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-30-2019, 02:46 PM   #1
CT Jack
Senior Member
 
CT Jack's Avatar
 
Join Date: May 2010
Location: Hebron, CT
Posts: 168
Default Rear Floor Pan Clearance

Should the rear floor pan touch the very top of the rear frame cross member or should there be clearance? My floor pan touches the frame so I installed a small piece of frame webbing. By doing this I think this is causing the pan to resonate when decelerating. I am thinking of either raising the pan so it clears the frame or installing some vibration dampening material to the top surface of the floor pan.
CT Jack is offline   Reply With Quote
Old 06-30-2019, 04:05 PM   #2
noyo55
Member
 
Join Date: May 2010
Posts: 45
Default Re: Rear Floor Pan Clearance

My late 30 coupe, that I have had since 64, has a strip of some type of webbing attatched to the pan as you have done. Iím the 3rd owner and the body has never been off the frame. I always thought that it was made that way so maybe that is common.
noyo55 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:40 AM.