Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-04-2019, 03:10 PM   #1
Jerry in Shasta
Senior Member
 
Jerry in Shasta's Avatar
 
Join Date: Jun 2010
Location: (Old)Shasta (Redding) CA
Posts: 324
Default Ajust Pressure plate in car

Can the pressure plate be adjusted in the car?


If so what are some of the tips?


Thanks

JB
__________________
Connoisseur of Rust
Jerry in Shasta is offline   Reply With Quote
Old 06-04-2019, 03:22 PM   #2
Patrick L.
Senior Member
 
Patrick L.'s Avatar
 
Join Date: May 2010
Location: Upstate NY and western Florida
Posts: 5,044
Default Re: Ajust Pressure plate in car

Yep, there are responses in search.

I just find the finger that contacts the release bearing first, mark it. Then use a long .0015" feeler strip and adjust the other fingers to a fairly stiff drag. Work the clutch several times and check/adjust them again. It takes a bit to lightly work the clutch pedal and feeler strip, but, it'll come.

Last edited by Patrick L.; 06-04-2019 at 03:31 PM.
Patrick L. is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:39 AM.