Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 07-04-2019, 10:21 AM   #1
Mart
Senior Member
 
Mart's Avatar
 
Join Date: May 2010
Location: Solihull, England.
Posts: 8,733
Default For Barners that like machining: Riser Block VIDEO.

I know some Barners like machining so I hope you don't mind me posting this.

I just posted up a video in a new format for me. This is just short snips from hours of videos cut together in quick succession to show how I made a riser block for my milling machine from a very large but not ideally shaped piece of steel. The action shots were distilled down to less than 6 minutes from hours of video.

I hope you might like it, and any feedback is welcome, especially on whether the new format works for you. I'll also add my general channel address so you can check out all my offerings.

Mart.

Martsrods channel: https://www.youtube.com/channel/UCzc...Vro40j-vjjZShg

Riser Block video: https://youtu.be/CJQFRPjD71M
Mart is offline   Reply With Quote
Old 07-04-2019, 12:42 PM   #2
mfagan
Senior Member
 
mfagan's Avatar
 
Join Date: May 2010
Location: Kaufman, TX
Posts: 822
Default Re: For Barners that like machining: Riser Block VIDEO.

Nice project!!
__________________
Marvin Fagan
214-697-8430
mfagan is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 07-04-2019, 01:25 PM   #3
outlaw
Senior Member
 
Join Date: May 2010
Location: Eagle River,Alaska
Posts: 352
Default Re: For Barners that like machining: Riser Block VIDEO.

Nice video. Thanks for sharing!
outlaw is offline   Reply With Quote
Old 07-04-2019, 01:43 PM   #4
Ronnieroadster
Senior Member
 
Ronnieroadster's Avatar
 
Join Date: Dec 2010
Location: East Coast in CT
Posts: 1,510
Default Re: For Barners that like machining: Riser Block VIDEO.

Excellent back yard Hot Rod machine work.
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish.
"Life Member of the Bonneville 200 MPH Club using a Ford Flathead block"
Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline.
First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH
Ronnieroadster is offline   Reply With Quote
Old 07-04-2019, 05:11 PM   #5
cas3
Senior Member
 
Join Date: Jan 2011
Location: sw minnesota
Posts: 4,543
Default Re: For Barners that like machining: Riser Block VIDEO.

Sponsored Links (Register now to hide all advertisements)
nice job Mart ! by golly, you will be moving to Hollywood soon i presume
cas3 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:03 AM.