|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-11-2011, 09:03 PM | #1 |
Member
Join Date: Nov 2011
Posts: 36
|
33 dump truck cab same as 1/2 ton?
Is the fenders and grill shell the same too? How can you tell a 33 from a 34 it has the cowl vent at the top grill shell looks alot like a 32.
|
11-14-2011, 06:27 PM | #2 |
Senior Member
Join Date: May 2010
Location: Corunna, Ontario, Canada
Posts: 309
|
Re: 33 dump truck cab same as 1/2 ton?
I'm no expert, but this is what I know? 33 and 34 were the same cab, engine cowl, grill and fenders for the big truck and the pickup, of their respected years. Differences of 33 versus 34 truck. No Ford oval and V8 emblems on the side of the engine cowl. 33 radiator cap more resembles the 32. The '34 rad cap has a fitted chrome strip that runs down the front and encloses a small Ford Oval. Grille shells were slanted a bit for the 33 and 34. All have a cowl vent. Not sure but I think no SS trim around the bars of the grille on the '33. Byron.
__________________
IT'S NOT YOUR AGE, IT'S YOUR ATTITUDE ! |
Sponsored Links (Register now to hide all advertisements) |
|
11-14-2011, 06:55 PM | #3 |
Senior Member
|
Re: 33 dump truck cab same as 1/2 ton?
34 cab has a extra 2" plus raised Swag on top of the others 2 at the belt line at the rear of the cab only .
|
11-14-2011, 06:56 PM | #4 |
Senior Member
Join Date: May 2010
Location: Above the gnat line in Georgia
Posts: 7,009
|
Re: 33 dump truck cab same as 1/2 ton?
34 cab has a wide belt molding across the back of the cab. I do not think 33 has that feature, but I am not an expert on 33-34 cabs.
|
11-14-2011, 07:28 PM | #5 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,094
|
Re: 33 dump truck cab same as 1/2 ton?
The reason for that elevated 'extra' belt moulding on the back of a '34 cab is that Ford raised the height of the seat back cushion and that extra space inside the cab accommodates that additional seat cushion height.
Last edited by DavidG; 11-17-2011 at 05:18 AM. Reason: word duplication |
11-17-2011, 04:03 AM | #6 |
Member
Join Date: May 2010
Location: Christchurch New Zealand
Posts: 55
|
Re: 33 dump truck cab same as 1/2 ton?
Sponsored Links (Register now to hide all advertisements)
|
11-17-2011, 05:19 AM | #7 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,094
|
Re: 33 dump truck cab same as 1/2 ton?
It's there; look again. It amounts to the inside area of the added stamped moulding and is largely taken up by the rear top edge of the seat back cushion.
|
11-17-2011, 11:58 PM | #8 |
Member
Join Date: May 2010
Location: Christchurch New Zealand
Posts: 55
|
Re: 33 dump truck cab same as 1/2 ton?
I'm certainly curious now. Is the metal seat-riser the same? (I can't compare as the 33 cab I have came off a bigger truck with the under-seat fuel tank).
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|