|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-05-2018, 11:38 AM | #1 |
Senior Member
Join Date: May 2010
Location: Lynden, Wa
Posts: 3,550
|
folding trunk rack parts
Hi All,
There is a chance I can get one of the original fold in half style trunk racks (will need a total resto). The dimensions are 33 long and 14 tall (from the sellers desc.). The kicker is, that it is set up for a different vehicle. My question is can I get the parts to use it on my sedan or should I just wait for one with the correct brackets. Thanks, Mike
__________________
1930 TownSedan (Briggs) 1957 Country Sedan |
03-08-2018, 11:21 PM | #2 |
Senior Member
Join Date: Jan 2012
Posts: 241
|
Re: folding trunk rack parts
Model a folding rack should measure 33x16 or you would need a special trunk to fit. Check out http://www.varcoinc.com/trunkrack.htm The bracket to mount to the car is just a piece of flat stock with a couple of bends (zig-zag) to accept the difference in width between the rack and bumper brackets. I also run a piece of flat stock to help support the weight of the trunk.
Brian |
Sponsored Links (Register now to hide all advertisements) |
|
03-09-2018, 11:38 AM | #3 |
Senior Member
Join Date: May 2010
Location: Lynden, Wa
Posts: 3,550
|
Re: folding trunk rack parts
Sponsored Links (Register now to hide all advertisements)
Mike
__________________
1930 TownSedan (Briggs) 1957 Country Sedan |
|
|
Sponsored Links (Register now to hide all advertisements) |
|