Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-28-2021, 08:41 AM   #1
Road Trip
Member
 
Join Date: Jun 2020
Location: North Carolina
Posts: 67
Default '29CC assembly question.

Putting together a '29 closed cab. Since I have no point of reference, as I didn't repair / replace anything ( I have new corners and door post wood) - How does the cab corner attach to the wood at the door? Also, what should my measurement be from the cowl post to the jamb, so the doors will fit? Thanks in advance.
Road Trip is offline   Reply With Quote
Old 09-28-2021, 09:08 AM   #2
wrndln
Senior Member
 
Join Date: May 2010
Location: Lakeville, MN
Posts: 4,795
Default Re: '29CC assembly question.

In Les Andrews volume 2, there is a very helpful section on 28/29 CCPU cab information. I copied the section and attached the pictures to this post. There are 3 more picture I am post in a second response.
Rusty Nelson
wrndln is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-28-2021, 09:09 AM   #3
wrndln
Senior Member
 
Join Date: May 2010
Location: Lakeville, MN
Posts: 4,795
Default Re: '29CC assembly question.

Last 3 pictures.
wrndln is offline   Reply With Quote
Old 09-28-2021, 03:59 PM   #4
Road Trip
Member
 
Join Date: Jun 2020
Location: North Carolina
Posts: 67
Default Re: '29CC assembly question.

Thanks for the info. I have the roof and all that pretty much figured out. My question is regarding the cab corners where they wrap around to the door jamb. Glue? Tacks? Mine came with steel jambs that were somewhat crudely welded to the original cab corners. I'm trying to do this correctly.
Road Trip is offline   Reply With Quote
Old 09-28-2021, 04:37 PM   #5
Neil Wilson
Senior Member
 
Neil Wilson's Avatar
 
Join Date: May 2010
Location: Boulder, CO
Posts: 526
Default Re: '29CC assembly question.

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Road Trip View Post
Thanks for the info. I have the roof and all that pretty much figured out. My question is regarding the cab corners where they wrap around to the door jamb. Glue? Tacks? Mine came with steel jambs that were somewhat crudely welded to the original cab corners. I'm trying to do this correctly.

Road Trip, You can email neil@aafords and ask for photos of 82-A quarter panel to lock pillar attachment if you want. Lock pillars are wood and quarter panels are nailed to lock pillars.
__________________
neil@aafords.com - email contact

https://aafords.com Ford Model AA Truck Club @ aafords.com
Neil Wilson is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:25 PM.