Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-29-2020, 03:21 PM   #1
hotrodcbx
Member
 
Join Date: Jul 2010
Posts: 78
Default Oil system mods??

Going through all my documentation I have for my '33 and '34 Fords I came across a article on oil system modifications. Just curious if anyone has heard of it? I cannot recall where I sourced it, hey I'm an old guy... Here goes..

1/ Convert the oil system to full pressure filtering using the drilling of the oil gallery and blocking the two sides, one line to filter and one line return. It goes into great detail on this and I'm sure many are familiar with it so I won't go into the details.

2/ Enlarge the vertical 1/4" front main bearing oil hole to 5/16" using a long drill bit.

/3 Enlarge the vertical 5/16" center main bearing oil hole to 3/8".

4/ Enlarge drilled passageway connecting the block oil pump cavity and rear main bearing saddle to 3/8"..

Any one heard of this and does it have any merit???
hotrodcbx is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:54 AM.