|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-14-2018, 10:43 AM | #1 |
Senior Member
Join Date: May 2010
Location: Lynden, Wa
Posts: 3,551
|
spark plug cleaning
Hi All,
Slightly off topic here-sort of. I wan in an antique store yesterday and found one of the hand held spark plug cleaners , the one with the bag of sand on top. Well I got to wondering if it would work on our plugs, but the rubber hole where you stick the plug seemed two small. Will it fit, could I make it bigger, or do these not work at all? Mike
__________________
1930 TownSedan (Briggs) 1957 Country Sedan |
04-14-2018, 11:06 AM | #2 |
Senior Member
|
Re: spark plug cleaning
Mike,
I can't answer your question but I remember most of the gas stations had those dedicated spark plug cleaners back in the day when all the gas stations did lube, oil changes and tune ups. A spark plug cleaner would be a nice addition to a personal garage. Hope you bought it. David Serrano |
Sponsored Links (Register now to hide all advertisements) |
|
04-14-2018, 02:11 PM | #3 |
Senior Member
Join Date: May 2010
Location: Southern Maine
Posts: 1,498
|
Re: spark plug cleaning
Doesn't the bag of abrasive go on the bottom and the plug fits into the top?
|
04-14-2018, 02:47 PM | #4 |
Senior Member
Join Date: May 2011
Location: Elyria, Ohio
Posts: 756
|
Re: spark plug cleaning
Flathead's right. The sand bag goes on the bottom. I found one of those cleaners a few years ago and I gave it to a model A friend. We just reamed the hole in the rubber opening a little bigger. Works good!
Marty |
04-14-2018, 02:59 PM | #5 |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,849
|
Re: spark plug cleaning
I have had one of those for years but i have seen them recently at Harbor Freight.
|
04-14-2018, 04:23 PM | #6 |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: spark plug cleaning
Sponsored Links (Register now to hide all advertisements)
Bill Owncook
__________________
"THE ASSISTANT GURU OF STUFF" |
04-14-2018, 06:38 PM | #7 |
Senior Member
Join Date: May 2012
Location: Chillicothe, Missouri
Posts: 1,175
|
Re: spark plug cleaning
I actually collect the larger Spark Plug Cleaners and Testers from Years ago.
If you Clean your Spark Plugs make SURE there is no Sand wedged in between the Porcelain and the metal Shell. If you see Sand inside there poke it loose with a wire or round gapping tool until its gone. Air Blast then file and re gap and your all set.
__________________
"If I asked people what they wanted they would have said faster horses." -Henry Ford "Primitive technology is not a design flaw" 1928 Ford Model A Roadster Pickup 1930 Gordon Smith Air Compressor 1941 Willy's Pickup 1960 Thunderbird-For Sale 1964 Buick Riviera 2x4 425 1965 Pontiac GTO, 455 Super Duty 2004 Dodge Ram SRT-10, V-10 Viper 1977 Charger Jet Boat,460 Ford,Jacuzzi Jet Front Engine Nostalgia Dragster,Supercharged 296 "Fullrace Flathead" Ford Engine Build up on DVD ask |
04-14-2018, 08:47 PM | #8 |
Senior Member
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,104
|
Re: spark plug cleaning
Make hole bigger I use glass bead ! Work great.
__________________
www.whidbeymodelaclub.com |
04-15-2018, 07:47 AM | #9 |
Senior Member
Join Date: Apr 2015
Location: Saint Cloud Mn
Posts: 745
|
Re: spark plug cleaning
They came with different rubber adapters for different size spark plugs. Buy the correct abrasive.
|
04-15-2018, 08:27 AM | #10 |
Senior Member
Join Date: Jul 2010
Location: Conifer, Colorado
Posts: 2,429
|
Re: spark plug cleaning
For those of us that are more visually oriented:
|
04-15-2018, 10:45 AM | #11 |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: spark plug cleaning
Mines' orfice hole was worn & I could even use SAND BOX, sand, after running it through a Flour Sifter.
Bill Makeshift
__________________
"THE ASSISTANT GURU OF STUFF" |
04-15-2018, 04:23 PM | #12 |
Senior Member
Join Date: May 2010
Location: Epping N.H.
Posts: 2,987
|
Re: spark plug cleaning
I have one of those nailed to the door jamb in my garage.There are a couple of different rubbers on a nail next to it,and a couple pieces of piano wire to poke in the plug after you're done blasting.I think the rubbers are something I carved out of old shock rubbers.I also have an old Autolite wall mounted cleaner and tester.It is about a foot tall,and has a chrome lever on the side to run it.It kind of looks like the old Southwind gas heater in my 39 Ford pickup.
|
04-15-2018, 05:02 PM | #13 |
Senior Member
Join Date: May 2010
Posts: 319
|
Re: spark plug cleaning
I can remember reading several experts saying sand blasting causes a rough surface on the porcelain which causes more carbon to stick. Besides when the electrodes are worn the plugs need to be thrown away.
|
04-15-2018, 05:26 PM | #14 |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: spark plug cleaning
REMEMBER, if your car runs PRIMO, don't even look at the plugs, you want to wear out the THREADS?
Bill Zoom
__________________
"THE ASSISTANT GURU OF STUFF" |
04-28-2018, 07:39 PM | #15 |
Senior Member
Join Date: May 2010
Location: Lynden, Wa
Posts: 3,551
|
Re: spark plug cleaning
Well I went back and got it. It is a VIXEN brand spark plug cleaner. Hooked it up and it works. Now I just need to clean it out and find the right media.
Mike
__________________
1930 TownSedan (Briggs) 1957 Country Sedan |
04-28-2018, 08:18 PM | #16 |
Senior Member
Join Date: Mar 2013
Location: Columbus Nebraska
Posts: 171
|
Re: spark plug cleaning
I have always been told that if you use one of those to bed SURE to clean the plug of all the grit. If it gets stuck up around the porcelain way up high, and falls out in the engine it plays heck with the rings. Or so I have been told.
|
04-28-2018, 08:55 PM | #17 |
Senior Member
Join Date: May 2010
Location: Lynden, Wa
Posts: 3,551
|
Re: spark plug cleaning
Makes sense to me. I am using 3X plugs so I can take them apart to clean all the grit out.
Mike
__________________
1930 TownSedan (Briggs) 1957 Country Sedan |
04-29-2018, 08:48 AM | #18 |
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,043
|
Re: spark plug cleaning
I have one of those, looks like Merc Cruzer's pictures.
Been sitting on the back of the bench for years. It never worked sitting on the bench, now after reading this thread and doing a bit of web research methinks it should be mounted vertically. Gonna find a place to wall mount it and give it a try. Might need to find new grit for it.
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! |
04-29-2018, 04:46 PM | #19 |
Senior Member
Join Date: May 2010
Location: Portland OR
Posts: 6,340
|
Re: spark plug cleaning
The only problem with taking plugs apart is getting them to reseal after. The crush rings can be found that might work but are not an off the shelf item anymore.
__________________
I know the voices aren't real but damn they have some good ideas! |
04-30-2018, 07:53 AM | #20 |
Junior Member
Join Date: Aug 2013
Posts: 22
|
Re: spark plug cleaning
I remember using one of those Vixen plug cleaners, and I believe the media was called Crisolite or something like that, available from the local auto parts store. Dave
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|