Go Back   The Ford Barn > The Swap Meet > For Sale > Early V8

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-17-2010, 12:15 PM   #1
Aircooled1
Senior Member
 
Aircooled1's Avatar
 
Join Date: May 2010
Posts: 805
Default PARTING:1936 Ford Pickup Sheetmetal

City: Los Molinos
State: California
Price: $100

PARTED '35 -'37 pickup trucks: .......1 Nice 1936 right side door with guts 300.00....One rusted out inside bottom 1936 gutted right door $125.00, one with no guts also rusted inside bottom and welded on replacement top $100.00,.... Pair 1936 hood sides with very rough tops, need work $50.00...... 1937 hood sides that need work $40.00....1936-1937 left front fender rough $50.00..... ask for other parts that I may have on hand for 1935-1937 Ford pickups,PM me or email me at anderaircooled@aol.com call 530-384-1651.....
Attached Images
File Type: jpg FORD 1937 PICKUP PAIR HOOD SIDES.jpg (115.2 KB, 90 views)
File Type: jpg FORD 1936 PICKUP R DOOR B1.jpg (100.1 KB, 50 views)
File Type: jpg LOS MOLINOS FORD PARTS YARD 2015 E.jpg (103.4 KB, 64 views)
File Type: jpg FORD 1936 PICKUP R DOOR A1.jpg (84.8 KB, 38 views)
File Type: jpg FORD 1936 PICKUP R DOOR A2.jpg (107.8 KB, 39 views)
File Type: jpg FORD 1936 PICKUP R DOOR A3.jpg (140.2 KB, 40 views)
File Type: jpg FORD 1936 PICKUP DOOR R A 2.jpg (104.6 KB, 29 views)
File Type: jpg FORD 1936 PICKUP DOOR R A 1.jpg (97.8 KB, 25 views)
File Type: jpg FORD 1936 TRUCK HOOD SIDES ROUGH.jpg (138.1 KB, 31 views)
File Type: jpg FORD 1936 PICKUP F FENDER L1 A.jpg (105.1 KB, 47 views)

Last edited by Aircooled1; 08-05-2016 at 03:16 PM. Reason: sold parts
Aircooled1 is offline   Reply With Quote
Old 09-21-2010, 05:58 AM   #2
oldandtired
Senior Member
 
Join Date: May 2010
Location: Edgefield, SC
Posts: 710
Default Re: PARTING:1936 Ford Pickup Sheetmetal

The spare tire rod shown in the picture fits 39 and maybe 38. The 36/7 only had one "eye" in the middle.
oldandtired is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 12-07-2010, 06:57 PM   #3
jim65123
Member
 
Join Date: May 2010
Location: R I
Posts: 42
Default Re: PARTING:1936 Ford Pickup Sheetmetal

do you possibly have an inner grill for a 35 ford pick up?email me at ilovesnowmen@cox.net Thanks
jim65123 is offline   Reply With Quote
Old 12-12-2010, 07:11 AM   #4
Bri35Ford
Junior Member
 
Bri35Ford's Avatar
 
Join Date: Oct 2010
Location: On the North East Coast of Grimsby U.K.
Posts: 18
Send a message via AIM to Bri35Ford
Default Re: PARTING:1936 Ford Pickup Sheetmetal

Hi I need a 35 Ford pk up inner lower grill panel, it has two crank holes pressed into the panel.......Cheer`s Bri
Bri35Ford is offline   Reply With Quote
Old 12-12-2010, 11:58 PM   #5
35 rancho
Member
 
35 rancho's Avatar
 
Join Date: Sep 2010
Location: San Diego
Posts: 92
Default Re: PARTING:1936 Ford Pickup Sheetmetal

I'm looking for the two plates that cover the windshield hinges for a 35 pickup Thanks Dave
35 rancho is offline   Reply With Quote
Old 12-23-2010, 04:57 PM   #6
Gumpy
Senior Member
 
Gumpy's Avatar
 
Join Date: May 2010
Location: Sf bay area
Posts: 1,453
Default Re: PARTING:1936 Ford Pickup Sheetmetal

bump
Gumpy is offline   Reply With Quote
Old 12-23-2010, 11:23 PM   #7
flat-v8
Senior Member
 
flat-v8's Avatar
 
Join Date: Nov 2010
Location: Magnolia Texas
Posts: 573
Default Re: PARTING:1936 Ford Pickup Sheetmetal

I need those little bed side panels that are in front of the rear fenders, and between the running boards and the bed, they close off that space.
flat-v8 is offline   Reply With Quote
Old 05-12-2011, 05:35 PM   #8
fredguaj
Junior Member
 
Join Date: May 2011
Posts: 1
Default Re: PARTING:1936 Ford Pickup Sheetmetal

I need the L/H windshield garnish strip for my 1936 ford pick-up.
fredguaj is offline   Reply With Quote
Old 08-22-2011, 03:23 PM   #9
MII
Junior Member
 
MII's Avatar
 
Join Date: Aug 2011
Location: Veazie, Maine
Posts: 29
Default Re: PARTING:1936 Ford Pickup Sheetmetal

i am trying to find the sheet metal under the rear seat area- the last 8" that fits against the rear of the cab on my 1936 ford pickup
MII is offline   Reply With Quote
Old 10-26-2011, 11:46 AM   #10
RPMREX
Member
 
Join Date: Aug 2010
Location: Elkhart,IN
Posts: 33
Default Re: PARTING:1936 Ford Pickup Sheetmetal

Hi,
Do you have any 35 or 36 3 window doors?
Thanks,
Rex
RPMREX is offline   Reply With Quote
Old 10-30-2011, 09:24 AM   #11
Aircooled1
Senior Member
 
Aircooled1's Avatar
 
Join Date: May 2010
Posts: 805
Default Re: PARTING:1936 Ford Pickup Sheetmetal

I have no sheet metal for coupes & sedans,only for trucks and pickups... Bump...
Aircooled1 is offline   Reply With Quote
Old 12-25-2011, 05:05 AM   #12
john young
Junior Member
 
Join Date: Nov 2011
Location: London, Kentucky
Posts: 15
Default Re: PARTING:1936 Ford Pickup Sheetmetal

Do you still have the 36 pickup windshield frame. I will be needing more parts as I get further along - thanks
john young is offline   Reply With Quote
Old 12-27-2011, 10:18 PM   #13
jsala29302
Junior Member
 
Join Date: Dec 2011
Location: california
Posts: 2
Send a message via Yahoo to jsala29302
Default Re: PARTING:1936 Ford Pickup Sheetmetal

looking for glove box cover and windshield motor covers left and right for 1937 ford truck
jsala29302 is offline   Reply With Quote
Old 01-04-2012, 09:28 PM   #14
john young
Junior Member
 
Join Date: Nov 2011
Location: London, Kentucky
Posts: 15
Default Re: PARTING:1936 Ford Pickup Sheetmetal

I am new to the forum and starting to work on my 36 Ford panel. I am looking for a windshield frame and a couple of horns that mount beside the grill. Any help will be greatly appreciated. shoot me a price if you can help out or maybe steer me in the right direction to find these much needed parts. Thanks
john young is offline   Reply With Quote
Old 01-05-2012, 06:01 AM   #15
Fe26
Senior Member
 
Join Date: May 2010
Location: Sydney, Australia
Posts: 948
Default Re: PARTING:1936 Ford Pickup Sheetmetal

Can you post photos of the '36' rear guards?
Thanks
Fe26 is offline   Reply With Quote
Old 02-05-2012, 10:36 AM   #16
JP58854
Junior Member
 
JP58854's Avatar
 
Join Date: Feb 2012
Location: Watford City ND
Posts: 5
Default Re: PARTING:1936 Ford Pickup Sheetmetal

Bump ?
JP58854 is offline   Reply With Quote
Old 06-20-2012, 12:20 PM   #17
36ford
Junior Member
 
36ford's Avatar
 
Join Date: May 2010
Location: Long Beach, MS
Posts: 10
Default Re: PARTING:1936 Ford Pickup Sheetmetal

I am looking for the front bottom 8" of the rear fenders that bolt to the running boards for a 36 pickup. Do you have any that are bad in the rear and top//
thanks DD
36ford is offline   Reply With Quote
Old 07-07-2012, 06:24 AM   #18
Roadster5040
Senior Member
 
Roadster5040's Avatar
 
Join Date: Dec 2011
Location: Houston Texas
Posts: 170
Default Re: PARTING:1936 Ford Pickup Sheetmetal

Have picture of 36 grille

thanks
Roadster5040 is offline   Reply With Quote
Old 08-14-2012, 10:50 AM   #19
chrsgom
Junior Member
 
Join Date: Jul 2012
Posts: 2
Default Re: PARTING:1936 Ford Pickup Sheetmetal

do you still have cab for sale
chrsgom is offline   Reply With Quote
Old 09-02-2012, 08:57 AM   #20
fasttrack
Member
 
Join Date: Nov 2011
Posts: 37
Default Re: PARTING:1936 Ford Pickup Sheetmetal

Hi, I am looking for a driver side fender and headlight bracket for a 35-36 truck.
Thanks
fasttrack is offline   Reply With Quote
Old 10-23-2012, 09:30 AM   #21
fasttrack
Member
 
Join Date: Nov 2011
Posts: 37
Default Re: PARTING:1936 Ford Pickup Sheetmetal

Do you have a headlight mount post for the driver side?
fasttrack is offline   Reply With Quote
Old 10-30-2012, 11:06 PM   #22
Conrad Elledge
Junior Member
 
Join Date: Jul 2010
Posts: 26
Default Re: PARTING:1936 Ford Pickup Sheetmetal

Hey,
I am looking for the hood latch and bumper bolt on tabs for the hood. My application is for a coupe but I used to have a pickup and the looked the same.

Small pieces I know but I need them.

Thanks, Conrad
Conrad Elledge is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 02-18-2013, 11:32 PM   #23
bigd11264
Junior Member
 
Join Date: Feb 2013
Posts: 2
Default Re: PARTING:1936 Ford Pickup Sheetmetal

I am looking for the spare tire strap that wraps around the top of the spare and goes down behind the spare. I have the locking hubcap and need the other half of the strap. email me

bigd11264@yahoo.com
bigd11264 is offline   Reply With Quote
Old 03-08-2013, 05:39 AM   #24
Jack1937fordpu
Senior Member
 
Jack1937fordpu's Avatar
 
Join Date: May 2011
Location: Leland, NC
Posts: 131
Default Re: PARTING:1936 Ford Pickup Sheetmetal

Do you have a seat riser for a 1937 Ford PU? Jack
Jack1937fordpu is offline   Reply With Quote
Old 05-25-2013, 08:54 AM   #25
36ford
Junior Member
 
36ford's Avatar
 
Join Date: May 2010
Location: Long Beach, MS
Posts: 10
Default Re: PARTING:1936 Ford Pickup Sheetmetal

Need front of rear fenders about 6" 1936 pickup can you help
DD
36ford is offline   Reply With Quote
Old 08-13-2013, 11:29 PM   #26
1967gt
Senior Member
 
1967gt's Avatar
 
Join Date: Jun 2013
Location: home of the REDS
Posts: 380
Default Re: PARTING:1936 Ford Pickup Sheetmetal

35 fenders ?? 35 /36 grille shell ???
1967gt is offline   Reply With Quote
Old 10-26-2013, 10:27 PM   #27
HFD
Junior Member
 
Join Date: Aug 2013
Location: Houston
Posts: 10
Default Re: PARTING:1936 Ford Pickup Sheetmetal

Can you send me Pictures of the drivers side rear Fender? c-mixon@hotmail.com
HFD is offline   Reply With Quote
Old 12-26-2013, 12:46 PM   #28
Bulligen
Senior Member
 
Bulligen's Avatar
 
Join Date: Nov 2012
Location: Elgin Illinois
Posts: 635
Default Re: PARTING:1936 Ford Pickup Sheetmetal

Would you sell me the Truck Grille for $200. including postage to Elgin, Illinois? Thanks, Rog
Bulligen is offline   Reply With Quote
Old 01-24-2017, 02:23 PM   #29
Aircooled1
Senior Member
 
Aircooled1's Avatar
 
Join Date: May 2010
Posts: 805
Default Re: PARTING:1936 Ford Pickup Sheetmetal

Still have 'em ..... Bump...
Aircooled1 is offline   Reply With Quote
Old 07-05-2017, 12:08 PM   #30
Aircooled1
Senior Member
 
Aircooled1's Avatar
 
Join Date: May 2010
Posts: 805
Default Re: PARTING:1936 Ford Pickup Sheetmetal

Have only a few Old Ford truck parts left for sale..... Bump...
Aircooled1 is offline   Reply With Quote
Old 09-03-2017, 01:54 PM   #31
Aircooled1
Senior Member
 
Aircooled1's Avatar
 
Join Date: May 2010
Posts: 805
Default Re: PARTING:1936 Ford Pickup Sheetmetal

Running low on the old F
Aircooled1 is offline   Reply With Quote
Old 10-15-2017, 10:53 AM   #32
Aircooled1
Senior Member
 
Aircooled1's Avatar
 
Join Date: May 2010
Posts: 805
Default Re: PARTING:1936 Ford Pickup Sheetmetal

Have only a few Old Ford truck parts left for sale..... Bump...
Aircooled1 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:40 PM.