|
Sponsored Links (Register now to hide all advertisements) |
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Junior Member
Join Date: Oct 2019
Location: Auckland
Posts: 9
|
![]()
Any body know how much water radiator pumps out to self level the water in the radiator to normal level .....to see if mine is normal
I am putting in about 1.5 litres ( just over 3 pints ) |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 5,454
|
![]()
Many of them like to level-out just above the top of the tubes....then they're happy! DD
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
![]() |
#3 |
Senior Member
Join Date: Aug 2012
Location: Perth, Western Australia
Posts: 2,333
|
![]()
mine would be well over half the tank full. Probably wouldn't be far off what you have .
__________________
"Came too close to dying to stop living now!" |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Oct 2012
Location: San Francisco Bay Area
Posts: 247
|
![]()
Mine actually likes to run below the tube tops, rarely goes above about 170 even in the summer. If I fill it over the tubes it just flows out into my recovery bottle while driving.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2010
Location: MN/FL
Posts: 5,012
|
![]()
Not what your asking, but I fill it to the top and let it desire what it needs. It'll let you know. If your running cool-ish don't worry.
__________________
https://www.youtube.com/watch?v=Y1D3a5eDJIs |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |