|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-07-2014, 07:04 PM | #1 |
Member
Join Date: Apr 2013
Location: Louisville KY
Posts: 53
|
Any old Ford employees here?
I recently acquired an old DuKane movie projector and record player along with dozens of films and records from the '50s which were put out by Ford for use by their salesmen and mechanics. It appears to work but I don't know how to install the film and synchronize it with the record. Does anyone know how to do that? If so please let me know. Here's some pics. Thanks….
__________________
1952 Crestline Victoria/flathead/Fordomatic 1972 F-350 w/9' dump bed/4 sp. manual 2013 Escape 1997 Camaro Z28 |
01-07-2014, 08:47 PM | #2 |
Senior Member
Join Date: May 2010
Location: Odessa, FL
Posts: 7,611
|
Re: Any old Ford employees here?
It could be that the film has a count down, before actual video, that would tell you when to engage the record to sync up the audio & video.
__________________
Imagination is more important than knowledge. |
Sponsored Links (Register now to hide all advertisements) |
|
01-08-2014, 05:56 AM | #3 |
Senior Member
|
Re: Any old Ford employees here?
I worked at the Lorain Ford Assembly Plant. I was a Paint Repairman in the final Garage. Lots of overtime there. I started in 1960.
|
01-08-2014, 08:10 AM | #4 |
Senior Member
Join Date: May 2010
Location: Wildwood, MO. (near St. Louis)
Posts: 1,792
|
Re: Any old Ford employees here?
Your projector loads from the top where the filmstrip arrow is located. The filmstrip sits loose in the red cup and the beginning end feeds down thru the projector. There appears to be a clip on the takeup spindle for the filmstrip to attach to after it comes thru the projector. It is advanced by the round crank midway down on the projector body. I can't tell if there is a remote advance button or not.
The records have a beep sound on the soundtrack which indicates to the operator when to advance the filmstrip. I don't believe that the filmstrip advance is automatic or synchronized. |
01-08-2014, 08:33 AM | #5 |
Senior Member
Join Date: May 2010
Location: Highland,MI
Posts: 1,196
|
Re: Any old Ford employees here?
Where did you find this? Very educational..
|
01-08-2014, 08:33 AM | #6 | |
Member
Join Date: Apr 2013
Location: Louisville KY
Posts: 53
|
Re: Any old Ford employees here?
Sponsored Links (Register now to hide all advertisements)
Quote:
__________________
1952 Crestline Victoria/flathead/Fordomatic 1972 F-350 w/9' dump bed/4 sp. manual 2013 Escape 1997 Camaro Z28 |
|
01-08-2014, 08:39 AM | #7 |
Member
Join Date: Apr 2013
Location: Louisville KY
Posts: 53
|
Re: Any old Ford employees here?
I purchased some old car brochures from an 85 year old guy who worked for Ford from 1952-97 and he sold it to me. He said they stopped using them in the late '50s. We've come a long way since these were used, haven't we?
__________________
1952 Crestline Victoria/flathead/Fordomatic 1972 F-350 w/9' dump bed/4 sp. manual 2013 Escape 1997 Camaro Z28 |
01-08-2014, 08:44 AM | #8 |
Senior Member
Join Date: May 2010
Location: Newington, Connecticut
Posts: 1,374
|
Re: Any old Ford employees here?
These were issued to all dealers to educate the salesmen on the new cars and thier features so they could better sell and also to the service department on new model prep, new features of the vehicle, how to repair components, etc... Sort of what the TSB's of today do. Each filmstrip has a label telling what it covers. That's quite a nice find. It's rare you find all three parts together, the projector, filmstrips and records.
__________________
Barry 50 F-1 |
01-08-2014, 09:33 AM | #9 |
Senior Member
Join Date: May 2010
Location: Wildwood, MO. (near St. Louis)
Posts: 1,792
|
Re: Any old Ford employees here?
Lebowski, The projector really isn't worth that much. There was one on ebay that didn't get a bid at $24 (eBay item number:121155492529) An individual record or filmstrip with out the other one is worth about $5 ea. A matching filmstrip and record would be worth about $15. Open the filmstrip canisters and smell them. If there is a strong odor of vinegar, the film is starting to decompose and may be worthless.
|
01-08-2014, 11:15 AM | #10 |
Senior Member
Join Date: May 2010
Location: Wilmington, OH/Lakeland, FL
Posts: 950
|
Re: Any old Ford employees here?
I have worked on many of these projectors. I spent over 40 years as an Audio/Visual technician for a school board. Often times the records have an automatic advance side as well as a manual advance (beeps) side. These filmstrip projectors later replaced the record with an audio cassette. Like Don indicated...the filmstrips tend to get brittle after a long period of time...depending on how and where they are stored.
Pat |
01-08-2014, 11:30 AM | #11 |
Member
Join Date: Apr 2013
Location: Louisville KY
Posts: 53
|
Re: Any old Ford employees here?
The film strips that I have looked at are flexible and not brittle and they don't smell, probably because they have been stored in airtight metal containers for all these years. When I have some time tonight I'm going to try to figure out how to insert the film and synchronize it with the record. If I get it working I'll make a video of it with my iPhone and post a link here. Thanks for the responses and advice….
__________________
1952 Crestline Victoria/flathead/Fordomatic 1972 F-350 w/9' dump bed/4 sp. manual 2013 Escape 1997 Camaro Z28 |
01-08-2014, 06:22 PM | #12 |
Member
Join Date: Apr 2013
Location: Louisville KY
Posts: 53
|
Re: Any old Ford employees here?
I can't figure out how to load the film. I see an arrow with the word "film" and I fed it through there but nothing happens. I played the record for several minutes but didn't hear any beeps. The guy just kept talking nonstop. The reverse side of the record is blank. Are there any web sites with visual instructions on how to make this thing work?
__________________
1952 Crestline Victoria/flathead/Fordomatic 1972 F-350 w/9' dump bed/4 sp. manual 2013 Escape 1997 Camaro Z28 |
01-09-2014, 09:46 PM | #13 |
Member
Join Date: Apr 2013
Location: Louisville KY
Posts: 53
|
Re: Any old Ford employees here?
I found a video on YouTube of a guy who bought a DuKane projector identical to mine for one dollar. He played a record on it but didn't have any film so I still don't know how to install the film. Any suggestions?
__________________
1952 Crestline Victoria/flathead/Fordomatic 1972 F-350 w/9' dump bed/4 sp. manual 2013 Escape 1997 Camaro Z28 |
01-10-2014, 11:30 AM | #14 |
Senior Member
Join Date: May 2010
Location: Ft Mohave,Az
Posts: 1,984
|
Re: Any old Ford employees here?
You might try here;
Free Dukane Projector User Manuals | ManualsOnline.com office.manualsonline.com › ... › Dukane › Dukane Computer Equipment Products 1 - 50 of 220 - Dukane Projector manuals and owner instruction guides.14A 225B Recordmaster Dukane 14A 225B Recordmaster Projector User ... 2223A Dukane Projector User Manual |
01-10-2014, 12:02 PM | #15 |
Member
Join Date: Apr 2013
Location: Louisville KY
Posts: 53
|
Re: Any old Ford employees here?
I went there and they don't have a manual for my model, which is 14A-390D so I did a Google search for DuKane and they're still in business in the Chicago area. I called their 800 number and a guy there is going to see if they have a manual for the model I have. I'll let you know what happens. Thanks….
__________________
1952 Crestline Victoria/flathead/Fordomatic 1972 F-350 w/9' dump bed/4 sp. manual 2013 Escape 1997 Camaro Z28 |
01-10-2014, 03:34 PM | #16 |
Senior Member
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,389
|
Re: Any old Ford employees here?
Have you re-read post #4??
Paul |
01-10-2014, 03:42 PM | #17 |
Member
Join Date: Apr 2013
Location: Louisville KY
Posts: 53
|
Re: Any old Ford employees here?
"Your projector loads from the top where the filmstrip arrow is located. The filmstrip sits loose in the red cup and the beginning end feeds down thru the projector. There appears to be a clip on the takeup spindle for the filmstrip to attach to after it comes thru the projector. It is advanced by the round crank midway down on the projector body. I can't tell if there is a remote advance button or not.
The records have a beep sound on the soundtrack which indicates to the operator when to advance the filmstrip. I don't believe that the filmstrip advance is automatic or synchronized." Yes I have. I don't know what a "takeup spindle" is and I don't see any kind of a "clip" or a "round crank" either. Hopefully the guy from DuKane will call me back and be able to send me some kind of instructions so I can figure it out….
__________________
1952 Crestline Victoria/flathead/Fordomatic 1972 F-350 w/9' dump bed/4 sp. manual 2013 Escape 1997 Camaro Z28 |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|