Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 11-01-2016, 05:36 PM   #1
Dennis Pereira
Senior Member
 
Dennis Pereira's Avatar
 
Join Date: May 2010
Location: Georgetown Divide Kelsey ca
Posts: 868
Default !929 Gas Tank

Sponsored Links (Register now to hide all advertisements)
Years ago I welded up bullet holes three or four and spent a lot of hours cleaning rust and scale out of the tank for my 29 standard coupe project and soldering up the leaking steering column support bracket sandblasted and painted and installed . But always worried about the tank sealer I used failing because I didn't take the tank apart to clean . But I had another real nice tank that I had used on another project so today I removed the patched tank and I'm going to use the other one with real nice tern coating as far I can see . Another step backward but piece of mind with no leaks or rust and scale .
__________________
Dennis in Kelsey ca
Dennis Pereira is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:08 AM.