|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-21-2021, 08:49 PM | #1 |
Member
Join Date: Jun 2011
Location: Tulsa, OK
Posts: 42
|
1936 Ford 5w Coupe Project
City:
Tulsa
State:
OK
Price:
sold
Bought this 1936 Ford 5-window coupe project a couple of years ago and have done nothing with it, so it's time to send it down the road. Pretty complete and pretty solid. The floors will need attention especially the driver side and driver-side rocker. Someone butchered the firewall to install a straight engine in it, but I found another cowl to donate the firewall. The tailpan is very solid, but beat up pretty good. I'm including a new EMS tailpan (the inner pan is straight and solid). It has a super nice trunk lid and the doors are really solid. The roof has been filled, but the lip is still there if you want to open it back up. The dash is straight, but has been filled and extra gauge holes cut. I'm including a really nice speedo and fuel gauge, plus a dual amp/temp gauge, but missing the temp bulb and capillary. The fenders are in pretty good shape, definitely better than most I have seen. There is no rear suspension or differential, not motor and transmission. The frame is straight and pretty good, but does have heavy pitting in the lower rail at the kick-up. If you're ready to build a '36 5w, this is a really good start. I have a clear Oklahoma title in my name. $SOLD for the package, no trades. Located in Tulsa, OK.
Last edited by ibflyin; 04-27-2021 at 08:39 PM. |
04-21-2021, 08:53 PM | #2 |
Member
Join Date: Jun 2011
Location: Tulsa, OK
Posts: 42
|
Re: 1936 Ford 5w Coupe Project
More pictures...
|
Sponsored Links (Register now to hide all advertisements) |
|
04-27-2021, 08:39 PM | #3 |
Member
Join Date: Jun 2011
Location: Tulsa, OK
Posts: 42
|
Re: 1936 Ford 5w Coupe Project
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|