|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-08-2021, 07:25 PM | #1 |
Senior Member
Join Date: Oct 2012
Location: Eastcoast
Posts: 863
|
Changing a 36 steering box for a 37
I have a complete 36 steering box and steering wheel for my 36. I picked up a really nice 37 box that had the shaft cut off just above the box.
Can I take the 36 box off and install the 37 box leaving the 36 worm on the shaft? I guess what I’m asking is the 36 worm and the 37 worm the same and the only change would be the selector? The Green bible shows different part numbers. Thanks |
02-08-2021, 08:17 PM | #2 |
Senior Member
Join Date: May 2010
Location: Masterton, New Zealand
Posts: 3,834
|
Re: Changing a 36 steering box for a 37
No...you'll need to remove both worms and install the 37 worm on the 36 shaft.
__________________
Unfortunately, two half wits don't make a whole wit! |
Sponsored Links (Register now to hide all advertisements) |
|
02-08-2021, 11:39 PM | #3 |
Senior Member
Join Date: Feb 2020
Location: Hayward,CA
Posts: 513
|
Re: Changing a 36 steering box for a 37
The ‘37 steering ratio is different than the ‘36.
The ‘37 is much preferred over the ‘36 and earlier. I have changed at least two over to the ‘37 ratio. One was a ‘35 convertible sedan. I think the first one I did I think was a ‘36. Don’t remember what body style, the owner had several thirties Fords. The ‘37 ratio makes the car steer easier. |
02-09-2021, 12:27 AM | #4 |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
|
Re: Changing a 36 steering box for a 37
There are some old threads on this subject that will be a big help for you to read before starting on your project. We put a '37 steering box in a '36 Phaeton and everything pretty much bolted right up. The most difficult part of the job was removing the '36 steering box mounting bracket that was riveted to the frame in four places, and also breaking one spot weld loose at top of bracket to frame. We replaced that bracket with a '37-'41 bracket. I'm thinking we covered all of these things in our thread. You'll need to do a search to find these threads. Good luck.
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein Last edited by JM 35 Sedan; 02-09-2021 at 12:36 AM. |
02-09-2021, 03:43 AM | #5 |
Senior Member
Join Date: May 2010
Location: N.W.England
Posts: 439
|
Re: Changing a 36 steering box for a 37
An excellent upgrade and well worth the effort. I did this to my 36 Cabriolet and the difference was noticeable.I was ready for the fight with the 36 mounting bracket but in the end it was pretty straightforward and came out without too much trouble.
|
02-09-2021, 04:43 AM | #6 |
Junior Member
Join Date: May 2010
Posts: 11
|
Re: Changing a 36 steering box for a 37
Sponsored Links (Register now to hide all advertisements)
And how do I identify it ? //Michael |
02-09-2021, 05:44 AM | #7 |
Senior Member
Join Date: May 2010
Location: tasmania
Posts: 221
|
Re: Changing a 36 steering box for a 37
don't have to change the mount drill a new hole in the area below the top mounting hole in the steering box housing much less work
|
02-09-2021, 05:48 AM | #8 |
BANNED
Join Date: May 2010
Posts: 3,019
|
Re: Changing a 36 steering box for a 37
The '36 mount can be used and 2 holes will line up....you add the third. Hope
your motor is out. I did this switch on my '35....very happy upgrade. Charlie ny |
02-09-2021, 07:41 AM | #9 | |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,113
|
Re: Changing a 36 steering box for a 37
Quote:
The pic below shows the one you want on the left, as it has the set-up with the provision for the wire bail to hold your switch in place, like the '36 has on the right. 1940 and later boxes just have a flat plate at that point. Your '36 Pitman arm will fit right on if you decide to use it. DD |
|
02-09-2021, 08:02 AM | #10 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,316
|
Re: Changing a 36 steering box for a 37
I used the original '36 mount in my '36 when I went to a '37 steering gear (a worthwhile upgrade). It must have been pretty easy, because even though it was 30 years ago, I don't remember any drama at all.
|
02-09-2021, 08:06 AM | #11 |
Senior Member
Join Date: Oct 2012
Location: Eastcoast
Posts: 863
|
Re: Changing a 36 steering box for a 37
I was just double checking the worms were different. I have the 37 bracket for the frame. I’m starting some progress, using original parts, got to love left overs from street rodders. The 37 box is on the floor. The car was going to be steet rodded and it came with no axles. I managed to get the front and rear axles, shocks, tires, steering box, steering wheel and transmission from a 37 that was street rodded.
Thanks for the replies |
02-09-2021, 08:10 AM | #12 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,316
|
Re: Changing a 36 steering box for a 37
"Street-Rodders" - The gift that keeps on giving.
|
02-09-2021, 08:11 AM | #13 | |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
|
Re: Changing a 36 steering box for a 37
Quote:
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein Last edited by JM 35 Sedan; 02-09-2021 at 08:25 AM. |
|
02-09-2021, 08:15 AM | #14 | |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,113
|
Re: Changing a 36 steering box for a 37
Quote:
Hey now, it helps ya to build character! DD |
|
02-09-2021, 09:38 AM | #15 |
Senior Member
Join Date: Oct 2012
Location: Eastcoast
Posts: 863
|
Re: Changing a 36 steering box for a 37
I also got the mounting bracket. I assembled the 36 column just to make a steerable roller.
Disassembling the 36 steering column, getting the wheel off and ignition switch might be challenging due to rust. To remove the steering shaft from the 36 is it as simple as removing the horn button headlight switch and pulling the steering wheel? Or do I have to disassemble even further? |
02-09-2021, 10:06 AM | #16 |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
|
Re: Changing a 36 steering box for a 37
Once you remove the horn button/light switch rod (w/o bending it!!), back the nut off until it's flush with the top of the threads on the steering shaft to prevent thread damage. Sometimes you get lucky and the steering wheel will disengage from its tapered fit on the shaft with a slight pull, but I've had to use a good steering wheel puller most of the time.
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein |
02-09-2021, 11:07 AM | #17 |
Senior Member
Join Date: Jul 2010
Location: Ventura, CA
Posts: 2,464
|
Re: Changing a 36 steering box for a 37
I put a '40 steering gear box w/40 mount in my '36 in 1955. The '37-40 worm and roller, compared to the earlier worm and sector, is like adding power steering, especially when parallel parking.
I used the '40 setup because I had it, left over from a '40 project, and my '36 has a column shift. I flipped the gear shift lever over to the left side of the column, which made the confined space in a '36 coupe much more user friendly.
__________________
Bill.... 36 5 win cpe |
02-09-2021, 11:31 AM | #18 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,316
|
Re: Changing a 36 steering box for a 37
When I was in high school, all of the guys who had cars with the gear shift "flipped" to the left side had steady girlfriends and 3 kids by the time they were twenty. The rest of us "made do" with them on the right side and an occasional floor shift.
|
02-10-2021, 09:00 AM | #19 | |
Senior Member
Join Date: Oct 2012
Location: Eastcoast
Posts: 863
|
Re: Changing a 36 steering box for a 37
Quote:
|
|
02-10-2021, 10:34 AM | #20 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: Changing a 36 steering box for a 37
In my younger days it was common to have your girlfriend move the column shifter! And then the short floor shifters were always fun with your girlfriend straddling it. The good old days.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|