05-17-2019, 06:00 AM | #1 |
Junior Member
Join Date: May 2014
Posts: 15
|
need piston
hello everyone
I did a stupid thing, im 67 and ought to know better, i dropped a small screw into my spark plug hole in my 1948 flathead pick up engine. then i started it, big mistake. I need a piston, some rings and a valve. It has an H stamped onto the head, can anyone help me. thank you it is a 6 cyl Last edited by mike dixon; 05-21-2019 at 05:53 AM. Reason: add text |
05-17-2019, 06:07 AM | #2 |
Senior Member
Join Date: Apr 2015
Location: Sweden
Posts: 3,045
|
Re: need piston
6 cylinder H engine ?
You need to check for what oversize you have if not STD to... |
Sponsored Links (Register now to hide all advertisements) |
|
05-17-2019, 06:09 AM | #3 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: need piston
Are you sure there is not cylinder wall damage? If you are going to replace a piston, at a minimum the clyinder would need to be honed I would think.
|
05-17-2019, 07:15 AM | #4 |
Senior Member
Join Date: May 2010
Location: Charlotte NC KiWi-L100 available here
Posts: 2,960
|
Re: need piston
I have some used H parts if it’s a 6 cylinder
|
05-17-2019, 07:47 AM | #5 |
Senior Member
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 2,651
|
Re: need piston
I also have some NOS six cyl pistons and rings if you can determine the size you need.
|
05-21-2019, 05:51 AM | #6 |
Junior Member
Join Date: May 2014
Posts: 15
|
Re: need piston
Sponsored Links (Register now to hide all advertisements)
|
05-21-2019, 05:51 AM | #7 |
Junior Member
Join Date: May 2014
Posts: 15
|
Re: need piston
6 cyl i need a piston, can you call me 618-401-5977 thank you so much
|
05-22-2019, 06:36 AM | #8 |
Junior Member
Join Date: May 2014
Posts: 15
|
Re: need piston
the piston is .040 still need it and rings and a valve
|
05-22-2019, 06:39 AM | #9 |
Junior Member
Join Date: May 2014
Posts: 15
|
Re: need piston
.040
|
05-22-2019, 07:03 PM | #10 |
Senior Member
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 2,651
|
Re: need piston
Let me look in my parts stash.
|
05-22-2019, 08:01 PM | #11 |
Senior Member
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 2,651
|
Re: need piston
Pm sent
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|