adjustment on 1929 open cab Pickup seat ?

[McMimmcs]

One of the members told me there is an adjustment ( forward / backward ) on the 1929 open cab pickup. If there is I can not find it. Very tight fit. Please help.

[Ted Duke]

No adjustment.

[rocket1]

ccpu seat is the same no adjustment,at 5ft. 11" not to bad,taller yikes!

[McMimmcs]

if no adjustment, is there a solution ?

[1931 flamingo]

Some remove the back cushion and "tie" the springs shorter, others make a new board and install 2-3" of foam covering and then upholster. All 29's are smaller than the 30-31's.

Paul in CT

[Jembow]

Sponsored Links (Register now to hide all advertisements)

I'm not tall but I had to tie the springs to pull the back cushion in

[The Master Cylinder]

You ever get that claustrophobic feeling? I got in a friends ccpu once and thought I wasn't going to get out again! I'm 6'2".

[BRENT in 10-uh-C]

Originally Posted by 1931 flamingo

Some remove the back cushion and "tie" the springs shorter, others make a new board and install 2-3" of foam covering and then upholster. All 29's are smaller than the 30-31's.

Paul in CT

Originally Posted by Jembow

I'm not tall but I had to tie the springs to pull the back cushion in

Compress the seat spring to the correct height while installing the seat cover. Then no need to tie the springs.

[McMimmcs]

Originally Posted by BRENT in 10-uh-C

Compress the seat spring to the correct height while installing the seat cover. Then no need to tie the springs.

Thanks everyone. I'll do as suggested.