The Ford Barn

Tom in SW VA · 08-19-2018, 03:06 PM

I understand how the hot air carb pipe installs, but how do get it clear of the choke rod? Any help would appreciated.

Tom in SW VA

Thanks, but there isn't another T within 100 miles.

redmodelt · 08-20-2018, 10:37 AM

Sponsored Links (Register now to hide all advertisements)

What year? Sorry I don't recall right now. Not all hot air pipes are the same. The 1925 back are different then the 1926/27 which are flatter in the area where the choke rod pass by. If it's a repop, might just need a little work. Also make sure it is seated around the exhaust manifold. The 1925 back style stand a little further away from the manifold then the 26/27.

08-19-2018, 03:06 PM	#1
Tom in SW VA Senior Member Join Date: May 2010 Location: Richlands, VA Posts: 533	Hot air carb pipe install I understand how the hot air carb pipe installs, but how do get it clear of the choke rod? Any help would appreciated. Tom in SW VA Thanks, but there isn't another T within 100 miles.

08-20-2018, 10:37 AM	#2
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,340	Re: Hot air carb pipe install Sponsored Links (Register now to hide all advertisements) What year? Sorry I don't recall right now. Not all hot air pipes are the same. The 1925 back are different then the 1926/27 which are flatter in the area where the choke rod pass by. If it's a repop, might just need a little work. Also make sure it is seated around the exhaust manifold. The 1925 back style stand a little further away from the manifold then the 26/27. __________________ I know the voices aren't real but damn they have some good ideas!