|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
03-29-2021, 05:37 PM | #1 |
Junior Member
Join Date: Feb 2013
Posts: 29
|
Speedometer pickup
I bought a car whose speedometer wasn’t working. I removed the speedometer pickup which appears to be in good shape. I fed both the old cable and a new one well into the housing. The gear spins but doesn’t engage the cable. The cables both are square on the ends, so I’m wondering if the receiving end in the pickup is worn out (it’s impossible to see up in there). Is this something that happens? If so, is there any remedy besides buying a new assembly?
|
03-29-2021, 06:07 PM | #2 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,741
|
Re: Speedometer pickup
Maybe your turtle takes the keyed cable instead of the square.
|
Sponsored Links (Register now to hide all advertisements) |
|
03-29-2021, 06:27 PM | #3 |
Junior Member
Join Date: Feb 2013
Posts: 29
|
Re: Speedometer pickup
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|