Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-29-2019, 04:52 PM   #1
Licensed to kill
Senior Member
 
Licensed to kill's Avatar
 
Join Date: Aug 2016
Location: Alberta
Posts: 930
Default No spark?

I rebuilt the engine (59A) in my tow truck. It ran pretty good before I pulled it but now, I have no spark. Points are new and set at 15 thou, cap and rotor are new as are the plugs. I had no spark using the condenser that was in it before so I replaced the condenser and still no spark. I had required the truck so, to eliminate any issues there, I ran a jumper wire from the coil to the negative on the battery, no spark. Battery is fully charged and it turns over very well. I'm out of ideas. What am I missing??.
Licensed to kill is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:00 AM.