electric wipers 40 pickup

[oldskool]

my 40 pu has a single non working wiper and I see speedway sells a universal electric wiper anyone using one in a 40-47 pickup pros and cons.thanks p/s truck has 12v system

[Krylon32]

For a really good wiper setup I would spend some extra money and get the wiper kit made for your truck from Newport Engineering.

[oldskool]

Originally Posted by Krylon32

For a really good wiper setup I would spend some extra money and get the wiper kit made for your truck from Newport Engineering.

it would be great if they made one for a single wiper system but presently they do not...thanks

[alanwoodieman]

I did a dual wiper conversion on a 41 cab, had to cut the glove box down by half to put the wiper on ps. I think this one came from carpenter or drake. If I had to do over again I would not.

[TJ]

Originally Posted by oldskool

it would be great if they made one for a single wiper system but presently they do not...thanks

Take a look at the one made by Mighty Wiper made by Pacific Western Design.

[Roger/Sacramento]

Sponsored Links (Register now to hide all advertisements)

I got the item from Drake and eliminated the arm that would go through the glove box. So only the driver side works. Doesn't matter because I never put wiper blades on anyway.

[russcc]

Rebuilding an original vacuum wiper may be a simple solution. Kent at Clean Sweep in Redmond OR did one for my '40, and it works great.

[41ford1]

I used a Speedway unit in my pickup. It works well when I need it. I set it up to stop when the switch is turned off. I like it parked at the cowl. If the built in park feature is used it will park against the center windshield bar.

[TJ]

Originally Posted by russcc

Rebuilding an original vacuum wiper may be a simple solution. Kent at Clean Sweep in Redmond OR did one for my '40, and it works great.

I did the same on my '41 pickup. Couple that with a little Rain X and it works like a champ.