Go Back   The Ford Barn > General Discussion > Model T (1909-1927)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-24-2019, 11:01 AM   #1
nosoup4u
Senior Member
 
Join Date: Dec 2010
Posts: 111
Default Steering column circumference?

Can someone tell me the diameter of the steering column on a model T? My speedster project is going to have a different column, and I want to install a monocle on it, but since I don't have the monocle yet, I don't know what circumference to build the column.
Diameter or circumference, either one.

Last edited by nosoup4u; 01-24-2019 at 11:36 AM.
nosoup4u is offline   Reply With Quote
Old 01-24-2019, 12:41 PM   #2
redmodelt
Senior Member
 
redmodelt's Avatar
 
Join Date: May 2010
Location: Portland OR
Posts: 6,339
Default Re: Steering column circumference?

The T column isn't round. It is kinda squished diamond shaped. So you would need to make your own mounting bracket if you are going to use a round column.
__________________
I know the voices aren't real but damn they have some good ideas!
redmodelt is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 01-24-2019, 02:03 PM   #3
nosoup4u
Senior Member
 
Join Date: Dec 2010
Posts: 111
Default Re: Steering column circumference?

I may have to order the monocle kit before I get started.
nosoup4u is offline   Reply With Quote
Old 01-24-2019, 07:45 PM   #4
redmodelt
Senior Member
 
redmodelt's Avatar
 
Join Date: May 2010
Location: Portland OR
Posts: 6,339
Default Re: Steering column circumference?

google Model T Ford monocle windshield, there will be lots of images of the mounting bracket that will give you an idea of what you would be working with.
__________________
I know the voices aren't real but damn they have some good ideas!
redmodelt is offline   Reply With Quote
Old 01-25-2019, 10:58 AM   #5
nosoup4u
Senior Member
 
Join Date: Dec 2010
Posts: 111
Default Re: Steering column circumference?

I've done that but I don't really get a good idea of the dimensions.
nosoup4u is offline   Reply With Quote
Old 01-25-2019, 11:55 PM   #6
tmodelman
Senior Member
 
tmodelman's Avatar
 
Join Date: May 2010
Location: north central FL
Posts: 580
Default Re: Steering column circumference?

Sponsored Links (Register now to hide all advertisements)
Here are the dimensions of the T steering column.


Lang's sells both a brass and an alum version of the monocle frame. The bracket will have relief for the horn tube.


Years ago used the alum one and painted it black. The clear shield was Plexiglas, as safety plate is a bit heavy for the clamp to hold it upright the wind. The plastic stood its angle with my road speeds back then




Lang's monocle, you can click on photos to enlarge and see the bracket up close.


https://www.modeltford.com/item/M2.aspx
Attached Images
File Type: jpg IMG_0002.jpg (31.3 KB, 12 views)
File Type: jpg scan0035.jpg (76.9 KB, 8 views)
tmodelman is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 02:34 AM.