|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-09-2019, 06:38 PM | #1 |
Senior Member
Join Date: May 2010
Location: Santa Cruz
Posts: 391
|
Source for '29 Roadster Door Panels
After some hunting it appears Mac's, Eckler's, Mike's etc all carry the same kit: uncovered 1/8 inch "water resistant" panel board. How are these to work with? Are they pre-drilled for the door clips? Are there alternatives?
I've made my own door & kick panels in the past from scratch, and the $99 bucks for these kits seems pretty cheap and easy. Thanks.
__________________
Seabright Hot Rods |
02-10-2019, 07:02 AM | #2 |
Senior Member
Join Date: Jul 2012
Location: Central Maine
Posts: 644
|
Re: Source for '29 Roadster Door Panels
Check with Classtique too. They have great products.
|
Sponsored Links (Register now to hide all advertisements) |
|
02-11-2019, 06:25 PM | #3 |
Senior Member
Join Date: May 2010
Location: Santa Cruz
Posts: 391
|
Re: Source for '29 Roadster Door Panels
Sponsored Links (Register now to hide all advertisements)
I did, spoke to Mike, and placed an order. Thanks.
__________________
Seabright Hot Rods |
|
|
Sponsored Links (Register now to hide all advertisements) |
|