|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-20-2012, 02:37 PM | #1 |
Junior Member
Join Date: May 2010
Posts: 27
|
rearseat backrest 29 tudor
how does the backrest attach to the body on a 29 tudor. there are no slots like on the 30 and the clips are attached to the wood frame around the window
|
12-20-2012, 08:05 PM | #2 |
Member
Join Date: Jun 2012
Location: Alton Bay, NH
Posts: 58
|
Re: rearseat backrest 29 tudor
You may want to post some pictures of what your dealing with. I just finished the interior of my 29 Tudor and there are 2 tabs on the back of the seat that slide into slots. Two metal tabs on the bottom which need to be lined up and/or drilled then secured with a nut and bolt.
|
Sponsored Links (Register now to hide all advertisements) |
|
12-21-2012, 12:45 AM | #3 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: rearseat backrest 29 tudor
Here's my 2-23-29 Tudor. Notice that my car is in the transition period and has both the slots and the brackets. My seat back top hooks over the two brackets. |
12-21-2012, 07:32 AM | #4 |
Senior Member
Join Date: May 2010
Posts: 1,369
|
Re: rearseat backrest 29 tudor
That's interesting, Tom. My 3-6-29 had the brackets and may have had the slots, but I wasn't paying attention when it was apart. I assume the slots eventually replaced the brackets?
|
12-21-2012, 10:57 AM | #5 | |
Senior Member
Join Date: May 2010
Posts: 3,099
|
Re: rearseat backrest 29 tudor
Quote:
__________________
http://www.abarnyard.com/ |
|
12-21-2012, 05:54 PM | #6 |
Member
Join Date: Jun 2012
Location: Alton Bay, NH
Posts: 58
|
Re: rearseat backrest 29 tudor
Sponsored Links (Register now to hide all advertisements)
|
12-21-2012, 06:19 PM | #7 |
Junior Member
Join Date: May 2010
Posts: 27
|
Re: rearseat backrest 29 tudor
mine is a may of 29. I have the clips like yours and no slots
|
12-21-2012, 06:21 PM | #8 |
Junior Member
Join Date: May 2010
Posts: 27
|
Re: rearseat backrest 29 tudor
the wood frame you have is what mine looks like. with the responses here i can see what i need to do. thanks to all
|
12-21-2012, 07:13 PM | #9 | |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: rearseat backrest 29 tudor
Quote:
Here is the passenger side bracket for the bottom of the back rest. Notice that it still has the bolt and a piece of the wire frame that broke off the rear backrest spring. In the picture Marco posted above you can see the two wire loops at the bottom of the backrest used to secure the bottom. The dark area is where I squirted some oil to start the bolts soaking for later removal. |
|
12-22-2012, 01:25 PM | #10 |
BANNED
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
|
Re: rearseat backrest 29 tudor
|
02-06-2019, 09:20 PM | #11 |
Junior Member
Join Date: Aug 2016
Location: Kennesaw, GA
Posts: 26
|
Re: rearseat backrest 29 tudor
Weird, so ours is a Nov 29 Tudor. We have brackets mounted to the wood seat frame but no slots. Needless to say, lots of head scratching to figure it out but this site saved our bacon. Thx!
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|