on off switch for 36 radio

[johndee138]

I need an on off switch for the resto of my 36 radio.
Anybody out there know where to find such?
Also need a glass bezel for same.
Thanks John M

[ken ct]

Originally Posted by johndee138

I need an on off switch for the resto of my 36 radio.
Anybody out there know where to find such?
Also need a glass bezel for same.
Thanks John M

I have a round glass for amid 30's radio I think. Its 3" diameter and is slightly curved [not flat] is this what you are looking for?? I need $20 for it plus shipping of $6. ken ct. It dosent quite fit through the hole in the waterfall where the head goes.??????? call me 1-203-260-5945 cell. Idea for you to try find something 3" diam jar,cover or something trace a circle 3" diam out of lite cardboard and try and see it it will fit in the head with clearance for the knobs. !! ken ct.

[keith oh]

John, The round convex glass was for 1937 radio head, Mac Ford lists them for $5.75. The 36 glass is a round convex 2/3 circle very hard to find. I cut mine out of flat glass and works in place of the convex. I have an extra one I cut out if you want to go that route. The 1936 FT-6 and 9 On-Off switch is part of the ash tray head and difficult to fix. Sometimes you can take the head apart and clean and fiddle with the switch and get it to work as I did, but most just put a in line switch in the power lead. Hope this helps. Keith Oh

[ken ct]

Sponsored Links (Register now to hide all advertisements)

Sorry John mine is a 37 glass,i thought it was a 36 so it does me no good either. lol ken ct/