Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-19-2011, 02:05 PM   #1
Charles Reese
Senior Member
 
Charles Reese's Avatar
 
Join Date: May 2010
Location: Richmond, VA
Posts: 882
Default Side Curtains ('28 Open Pickup)

1. Can someone please post photos of properly installed side curtains (preferably open cab pickup). Am particularly interested in the position of the weather strip over the door side curtain (i.e. does it go inside or outside of the door curtain).

2. Would also appreciate a close-up photo of the female ‘socket’ (mounted on the side curtain material that accepts the studs on the windshield stanchions. I believe the original may have ‘lift the dot’ stamped on the face.

3. The rear edge of the rear 1/4 side curtain fastens to the top material with what I believe is a Cinch 63312 single stud which has been crimped to a backing plate (see photos). This seems to have a rather unfinished appearance … should there be a finishing ‘button’ of some sort to cover the crimped area? If so, would appreciate a close-up photo and name of a source/part #.
Attached Images
File Type: jpg cinch-1.jpg (50.5 KB, 29 views)
File Type: jpg cinch-2.jpg (48.7 KB, 23 views)
Charles Reese is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:16 AM.