|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-03-2017, 09:52 AM | #1 |
Senior Member
Join Date: May 2010
Location: East Northport, NY
Posts: 178
|
Oil pan dipper tray modification for full pressure pump
I have a B motor that is set up for full pressure. When I got it there was no dipper tray in the oil pan.
I want to modify a dipper tray for use so I have some baffles in the pan and will keep the oil by the pickup. When I mocked it up I found that I needed to cut out so much that I would end up with only one baffle which won't serve too much purpose. Does any one have any advice or photos of how they have done this before. Thanks! |
|
|
Sponsored Links (Register now to hide all advertisements) |
|