Go Back   The Ford Barn > General Discussion > Late V8 (1954+)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 11-24-2021, 12:24 PM   #1
Jerold Ebke
Junior Member
 
Join Date: Jan 2017
Location: Nebraska
Posts: 29
Default Window raiser stem extender source

Seeking a source for an extender to fit on the window regulator stem to help window handle fit over new thicker door panel.
55 Crown Victoria. 16 spline, 7/16 diameter, clip retainer.
Anyone know of a source.
Been looking on Internet. Not seem to be finding matching.
Jerold Ebke is offline   Reply With Quote
Old 11-24-2021, 05:16 PM   #2
paul2748
Senior Member
 
paul2748's Avatar
 
Join Date: May 2010
Location: Midland Park, NJ
Posts: 3,214
Default Re: Window raiser stem extender source

Do you still have the spring underneath the panel". If so, take it out.



Never heard of such a thing unless made as a one off. Best bet is to remove the extra padding right where the handle goes, same diameter as the handle base.


Use a rubber mallet to set the handle. That is what I have done on the 50's Ford handles
__________________
48 Ford Conv
56 Tbird
54 Ford Victoria
paul2748 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 11-24-2021, 05:36 PM   #3
5851a
Senior Member
 
Join Date: Oct 2014
Location: NE Iowa
Posts: 1,148
Default Re: Window raiser stem extender source

Check with Mustang parts suppliers, you need an extension on window crank when switching to Pony interior, may be something you can use.
5851a is offline   Reply With Quote
Old 11-25-2021, 07:25 AM   #4
LOWRIDER
Senior Member
 
LOWRIDER's Avatar
 
Join Date: May 2010
Location: Kingman Az. 86409
Posts: 404
Default Re: Window raiser stem extender source

Sponsored Links (Register now to hide all advertisements)
I've taken a drill just big enough to fit between the splines and drilled out the bottom of the handle a bit so it would stay attached to n the stem. Still had to lose the spring behind the trim panel.
__________________
Dan Kingman Az. 86409
LOWRIDER is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:18 AM.