Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-21-2019, 03:28 PM   #1
corvette8n
Senior Member
 
corvette8n's Avatar
 
Join Date: Jul 2010
Location: 36 miles north of Albany NY
Posts: 1,789
Default Help bearing race removal F1 hub

I'm trying to get the inner and outer races out of the hub, I was able to find a socket to fit the outer race #09195 and drive it out. The inner race #14276 looks like it would need to be pulled out, I tried a punch and chisel but I didn't want to bugger up the hub. Any ideas, also best place to get parts?
Thanks
corvette8n is offline   Reply With Quote
Old 10-21-2019, 03:47 PM   #2
skidmarks
Senior Member
 
skidmarks's Avatar
 
Join Date: Aug 2010
Location: newark, delaware
Posts: 3,293
Default Re: Help bearing race removal F1 hub

Run a bead of weld on the bearing surface. When it cools off it will shrink and fall out
skidmarks is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 10-21-2019, 05:22 PM   #3
rich b
Senior Member
 
rich b's Avatar
 
Join Date: May 2010
Location: Minnesota
Posts: 1,128
Default Re: Help bearing race removal F1 hub

What aspect of this are having a problem with?

I knocked quite few inner races out of all the different styles of F-1 and F-100 hubs with a regular old flat nosed punch.

On the hubs with-out notches, you just got to work your way around, evenly, driving it a little at a time.
rich b is offline   Reply With Quote
Old 10-21-2019, 05:28 PM   #4
JSeery
Senior Member
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 13,384
Default Re: Help bearing race removal F1 hub

I likewise have always used a punch.
JSeery is offline   Reply With Quote
Old 10-21-2019, 05:46 PM   #5
corvette8n
Senior Member
 
corvette8n's Avatar
 
Join Date: Jul 2010
Location: 36 miles north of Albany NY
Posts: 1,789
Default Re: Help bearing race removal F1 hub

The only punch I have is a little short, so it's quite an angle and it's messing up the inner edge of the hub. I'll take a trip to the hardware store to see if I can pick up a longer better made one.
corvette8n is offline   Reply With Quote
Old 10-21-2019, 06:08 PM   #6
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 5,672
Default Re: Help bearing race removal F1 hub

You really need to ask for a "drift" rather than a punch. A drift has a flat surface ground on the end doing the driving, rather than the point on a punch. DD


__________________
T5 W/TORQUE TUBE


Understand the subject at hand before you disagree!




V8COOPMAN is offline   Reply With Quote
Old 10-21-2019, 06:15 PM   #7
Hal Beatty
Member
 
Hal Beatty's Avatar
 
Join Date: Jul 2012
Location: Bellingham, WA
Posts: 96
Default Re: Help bearing race removal F1 hub

Use a piece of keystock; the "average" stuff isn't hardened so it won't damage the bearing race and it's easy to grind to whatever angle you need on the end. What I was trained to do when I went through the apprenticeship 45 years ago...
Hal Beatty is offline   Reply With Quote
Old 10-21-2019, 07:01 PM   #8
JSeery
Senior Member
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 13,384
Default Re: Help bearing race removal F1 hub

You will most likely need a good set of drift punches for other projects anyway.
JSeery is offline   Reply With Quote
Old 10-21-2019, 07:08 PM   #9
Ken/Alabama
Senior Member
 
Ken/Alabama's Avatar
 
Join Date: May 2010
Location: Alabama
Posts: 2,265
Default Re: Help bearing race removal F1 hub

What Skidmarks said!!
Ken/Alabama is offline   Reply With Quote
Old 10-22-2019, 08:50 PM   #10
1948F-1Pickup
Senior Member
 
1948F-1Pickup's Avatar
 
Join Date: Oct 2015
Location: Socal
Posts: 331
Default Re: Help bearing race removal F1 hub

Quote:
Originally Posted by Hal Beatty View Post
Use a piece of keystock; the "average" stuff isn't hardened so it won't damage the bearing race and it's easy to grind to whatever angle you need on the end. What I was trained to do when I went through the apprenticeship 45 years ago...
Looking at those hubs for the first time a few months back I marveled at the inaccessibility to that bearing race.
1/4" keystock is what I used when I did the job.
Easy to get the right profile on it with a grinder...... just what the doctor
ordered.
Attached Images
File Type: jpg IMG_1984.jpg (19.4 KB, 1 views)

Last edited by 1948F-1Pickup; 10-27-2019 at 11:18 AM.
1948F-1Pickup is offline   Reply With Quote
Old 10-23-2019, 07:20 AM   #11
corvette8n
Senior Member
 
corvette8n's Avatar
 
Join Date: Jul 2010
Location: 36 miles north of Albany NY
Posts: 1,789
Default Re: Help bearing race removal F1 hub

https://www.fordbarn.com/forum/showthread.php?t=271366
Got it done thanks.
corvette8n is offline   Reply With Quote
Old 10-23-2019, 02:44 PM   #12
aussie merc
Senior Member
 
aussie merc's Avatar
 
Join Date: Sep 2016
Location: sydney australia
Posts: 197
Default Re: Help bearing race removal F1 hub

check the tool cataloges many mainstream tool brands actually supply bearing drifts which are the correct length and shape
aussie merc is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:12 PM.