Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-17-2019, 08:44 PM   #1
INVISIBLEKID
Member
 
INVISIBLEKID's Avatar
 
Join Date: Apr 2012
Location: Gilroy,CA
Posts: 30
Question 30/31 roadster windshield "snaps"?

Going to eliminate the "snaps" from my windshield from my roadster (frame)..... There are 5 in the windshield frame.... Do they just unscrew?
I will never be running a top, so they have to go to clean up the frame.
Advise/knowledge appreciated....... Thanks.
INVISIBLEKID is offline   Reply With Quote
Old 10-17-2019, 10:25 PM   #2
Mike Peters
Senior Member
 
Mike Peters's Avatar
 
Join Date: Aug 2012
Location: South East Wisconsin
Posts: 648
Default Re: 30/31 roadster windshield "snaps"?

Open car windshield snaps install with a "friction" fit. You can pry them out with a screwdriver.
Mike Peters is online now   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 10-17-2019, 11:38 PM   #3
midgetracer
Senior Member
 
midgetracer's Avatar
 
Join Date: May 2010
Location: Bismarck ND
Posts: 906
Default Re: 30/31 roadster windshield "snaps"?

They leave a large hole,about 3/8 inch. Unless of course the were an aftermarket of screw in ones. You can tell if there is a phillips head in the snap.
midgetracer is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:55 AM.