Zenith Carb

[keyswitch1]

I have several zenith carbs that I will never need. What are they worth

[Fred K-OR]

From 0 to 2 or 3 hundred dollars depending on what shape there in.

[30 Closed Cab PU]

For reference - Bert's rebuilt Zenith Carbs that use flow tested jets and tested on an A, run about I believe $350 without a core. So as Fred says, depends on what condition, if they have been tested on a car, and what someone will pay for them.

[Gary WA]

Do u have a zenith 3?

[F.M.]

Originally Posted by Gary WA

Do u have a zenith 3?

I have Five of them.. Sorry about delay, I had to find them. Now I hope I get them to show up as I have had quite a few that doubt what I said I had..

[SteveB31]

I will likely buy them for $50 each. But would love to see photos first.

Steve

[Purdy Swoft]

Zenith three carburetors are few and far between .

[Benson]

Zenith 3 carbs used less cast iron than 1 or 2.

[Railcarmover]

how about a Holley? H on the upper half?

B carbs?

[F.M.]

Originally Posted by Railcarmover

how about a Holley? H on the upper half?

B carbs?

Used Dec.1927 thru Dec.1928

[1931 flamingo]

Are these cores or re-built??
Paul in CT

[Purdy Swoft]

Model B carburetors are thin and the upper flange is easily broken . I also have a couple of brazed upper model B carb housings .

[keyswitch1]

They are not rebuilt !

[keyswitch1]

I think I will keep all fifty of them, I thought that rebuilt sells for $ 350.00 with your core that these would be worth some money,my mistake

[mike657894]

there is a guy selling rebuilds for 170 on ebay. they go on ebay rough 50 nice may work by the look of it 100-125

[F.M.]

Pictures are posted of the Zenith # 3 Carbs..

[Purdy Swoft]

I think that Rex Reheis discovered several Zenith 3 carburetors sometime in the 90s . There was a write up in one of the national model A magazines about the carburetors and their discovery . A lot of model A guys , myself included had never seen or heard of a Zenith 3 at the time .I would consider them to be collectors items .

[Benson]

I have seen one complete Upper/Lower and ONE and a half lower castings.

I say 1/2 because one lower casting was a Zenith 2 which someone used a Dremel in a feeble attempt to make the 2 into a 3 ... was sold on Ebay as I remember.