Go Back   The Ford Barn > The Archives > Late V8

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Old 01-01-1970, 12:00 AM   #1
Guest
 
Posts: n/a
Default V8 intake manifolds




I am at home with the Model T, the Model A and early v8's and know little about late v8's. A friend is cleaning his garage. He brought me 3 intake manifolds he no longer needs. All 3 are aluminum and he thinks they fit the 260, 289 and the 302 from mid 60's to late 70's. Can anyone narrow this year spread down a bit? One is an Edelbrock # F4B, one is an Offenhauser # 360, and one is a Cobra and this one has 2 carburetors with linkage. I would like to get some idea of value. These are barn fresh and are not sanitary, but seem to have no physical damage. The carbs on the Cobra would be cores for rebuild.



<table><tr><td><font face="arial">


 
Old 01-01-1970, 12:00 AM   #2
Guest
 
Posts: n/a
Default Re: V8 intake manifolds







If they are all the same size and bolt pattern then they will all fit 221, 260, 289, and 302 from '62 thru now. Check on eBay, single 4 bble are going $75 to $150 average, the 2x4 is what the market will bare. Probably in the neighborhood of $250 to $350. By not seeing the real things, you have to keep in mind that this is only my guess-to-mates.



<table><tr><td><font face="arial">


 
Sponsored Links (Register now to hide all advertisements)
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:48 AM.