Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 05-03-2018, 09:54 AM   #1
whizzernick
Senior Member
 
whizzernick's Avatar
 
Join Date: Jul 2013
Location: Hayward Ca
Posts: 409
Default 35 V-8 stud instlation

any special sealant to put on studs in my 35 V-8 ?
Their several thread inserts .
whizzernick is offline   Reply With Quote
Old 05-03-2018, 11:17 AM   #2
Bored&Stroked
Senior Member
 
Bored&Stroked's Avatar
 
Join Date: Jan 2011
Location: Central Ohio
Posts: 2,290
Default Re: 35 V-8 stud instlation

Yes - I always use a good coating of PTF based stud sealer . . . ARP makes some and it is good stuff. Also, coat the sides of the studs with anti-seize before you put the heads on.

https://www.jegs.com/i/ARP/070/100-9904/10002/-1

Good luck
Bored&Stroked is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 05-06-2018, 02:08 PM   #3
Marvin/TN
Senior Member
 
Join Date: May 2010
Location: Chattanooga, TN area
Posts: 811
Send a message via AIM to Marvin/TN
Default Re: 35 V-8 stud instlation

GM has a Teflon based sealant to use of Studs that go into the water jacket. Not a tape but but kinda of a paste, comes in a tooth paste type tube. Can't remember the P/N number for it at the moment.Should be able to get it at any GM dealer.
Marvin/TN is offline   Reply With Quote
Old 05-06-2018, 03:37 PM   #4
B-O-B
Senior Member
 
B-O-B's Avatar
 
Join Date: May 2010
Location: Ft Mohave,Az
Posts: 1,742
Default Re: 35 V-8 stud instlation

permatex thread sealant with ptfe
B-O-B is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:36 AM.