|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-03-2018, 07:08 PM | #1 |
Senior Member
Join Date: May 2010
Location: South California
Posts: 6,188
|
condensor application Q...
Anyone can say what distributor application these three Mallory condensers fit ?
The one pic shows the size that fit my Mallory dist. These three are TOO large for use on my dist. |
09-03-2018, 08:30 PM | #2 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,317
|
Re: condensor application Q...
Those are Mallory aftermarket condensers and have a nominal value of .36 micro-farads, which makes them suitable to use with most conventional dual point ignition systems. They are designed to be mounted externally on the distributor housing, as the second set of points occupy the space where an internal condenser usually fits (on "regular" distributors, as opposed to early Ford type units). They are usually quite robust, and will function satisfactorily even when the cases have been split and cracked.
|
Sponsored Links (Register now to hide all advertisements) |
|
09-04-2018, 12:15 PM | #3 | |
Senior Member
Join Date: May 2010
Location: South California
Posts: 6,188
|
Re: condensor application Q...
Quote:
I’m guessing that such a condenser can be located anywhere , within reason. Or is there an “electrical” reason to not use a long wire lead with a condenser ? |
|
09-04-2018, 12:38 PM | #4 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,317
|
Re: condensor application Q...
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|