07-26-2017, 05:45 PM
|
#21 |
|
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: Fuel pressure
Many European car makers used to use a pressurised tank to supply the fuel to the motor - generally about 2 psi. I've seen pumps mounted on the dash to pressurise the tank and I've seen the exhaust used. A line was run from the exhaust to the tank (via a valve and flame suppressor) which allowed the inert exhaust gasses to enter and pressurise it.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
|
|
 |
«
Previous Thread
|
Next Thread
»
Linear Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 10:52 AM.