30-31 pickup seat cushion pic request

[theHIGHLANDER]

Since day 1 I figured my seat cushion was wrong. I think it's roadster with the rounded corners. My seat riser is square so I'd think the cushion should be as well, at least at 1st glance. So I'm wondering if anyone would like to post a pic or 2 of your pickup lower cushions. Mine's and early 31 so 30 would be the same, and I am aware that a change was made when they went to the metal top and firewall indent which doesn't apply to mine. Thanks in advance.

[KMeredith87]

Here are a few pictures of mine from my late '30 CCPU. To the best of my knowledge this is a recovered original but I could always be wrong. A little hard to get picture of so let me know if you are looking for anything more specific than this. (The seat riser on mine is also squared off) The picture of the cushion on the bed of the truck is the seat back.

[Al Mack]

Here's a pic of my 1931 pickup (December 1930 VIN) that rolled-off the St. Paul, Minnesota assembly line. Pretty much original front seat assembly except for the color-dyed (original?) material. The wood block in front of the seat riser is not a part of the assembly.....it's just a piece of wood laying there.

[theHIGHLANDER]

Sponsored Links (Register now to hide all advertisements)

Looks like mine's wrong. I guessing you have an extended bit of metal to hold it place too? Mines a bit smaller and totally flat on the bottom. Hit a big enough whoop in the road it will slide forward as there's nothing to hold it in place. Thanks for the pictures.