The Ford Barn

sconnors · 08-26-2014, 04:20 PM

About to replace the cowl & shell lacing on my '30 CCPU. Do you need to remove the hood to do this?

I've done a search and picked up a lot of great tips/tricks to do both. Any other would be greatly appreciated.
Scott

BRENT in 10-uh-C · 08-26-2014, 04:23 PM

Quote:

Originally Posted by sconnors

About to replace the cowl & shell lacing on my '30 CCPU. Do you need to remove the hood to do this?

I've done a search and picked up a lot of great tips/tricks to do both. Any other would be greatly appreciated.
Scott

Well, in theory I don't guess you do completely however the screw that mounts the cowl lacing in the center of the firewall is directly beneath the center hood rod. You would at minimum need to move the hood enough to get to that.

sconnors · 08-26-2014, 08:27 PM

Sponsored Links (Register now to hide all advertisements)

thanks I guess I'll take the hood off.

08-26-2014, 04:20 PM	#1
sconnors Senior Member Join Date: Jul 2012 Location: Stephentown Posts: 446	Cowl & Shell Lacing About to replace the cowl & shell lacing on my '30 CCPU. Do you need to remove the hood to do this? I've done a search and picked up a lot of great tips/tricks to do both. Any other would be greatly appreciated. Scott

08-26-2014, 08:27 PM	#3
sconnors Senior Member Join Date: Jul 2012 Location: Stephentown Posts: 446	Re: Cowl & Shell Lacing Sponsored Links (Register now to hide all advertisements) thanks I guess I'll take the hood off.