|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-29-2012, 10:09 AM | #1 |
Senior Member
Join Date: May 2010
Location: Rock Hill, S.C.
Posts: 985
|
Panel Delivery Post on Metal Shaping Site
Most of you that know me know that I like to hang around some of the sheet metal forums and I have learned a lot from those folks. Several of them have asked me to post info after I got back from the meets and I have done so.
Here is a link to the post that I made: http://allmetalshaping.com/showthread.php?t=6434 If the doesn't get you thru to the site, here is a link directly to the album that I made there. http://allmetalshaping.com/album.php?albumid=98 It is more about sheet metal on the Panel Delivery than the actual restoration work, but some might find it interesting.
__________________
Uncle Bud says "too soon old, too late smart!" |
06-29-2012, 01:50 PM | #2 |
Senior Member
Join Date: May 2010
Location: Dripping Springs, Texas
Posts: 286
|
Re: Panel Delivery Post on Metal Shaping Site
The site asks for user name & password?????????????
__________________
The pursuit of excellence is healthy and rewarding. The pursuit of perfection is frustrating, neurotic and a terrible waste of time. |
Sponsored Links (Register now to hide all advertisements) |
|
06-29-2012, 02:58 PM | #3 |
Senior Member
|
Re: Panel Delivery Post on Metal Shaping Site
Same here the album requires that we join the Forum to see the pics.
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
06-29-2012, 05:06 PM | #4 |
Senior Member
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,115
|
Re: Panel Delivery Post on Metal Shaping Site
The link to the post with pictures works OK, it's just the album that requires name and password.
|
06-29-2012, 05:20 PM | #5 |
Senior Member
Join Date: May 2010
Location: Naperville, IL
Posts: 1,387
|
Re: Panel Delivery Post on Metal Shaping Site
Great job with the marvelous work. I saw it at OSH and was very impressed. Now, the big question is what is next? Gar Williams
|
06-29-2012, 10:26 PM | #6 |
Senior Member
Join Date: May 2010
Location: Rock Hill, S.C.
Posts: 985
|
Re: Panel Delivery Post on Metal Shaping Site
Sponsored Links (Register now to hide all advertisements)
Here is a link to my webpage that has been updated often since I started this project. I am adding more daily as I go back and gather photos from the last several months. I have not done much updating for a while, but am doing so now since the project is completed. http://www.mantiquesresto.com/Projec...PD/dfpd01.html Click on the 'red' colored box at the top of the page to access the restoration section. If you click on the colored 'boxes' on some of the later pages, it will go to a more detailed page.
__________________
Uncle Bud says "too soon old, too late smart!" |
|
|
Sponsored Links (Register now to hide all advertisements) |
|