Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 04-28-2020, 03:24 PM   #1
Pandersen33
Member
 
Pandersen33's Avatar
 
Join Date: Jun 2017
Location: Loomis, CA
Posts: 35
Default Reverse eyed spring with Mitchell OD?

Has anyone done this? I am working on a 35 sedan and would like it to sit just a bit lower. However the Mitchell OD doesnt look like it has too much more room over it. Just curious if I need to look at more cutting or if another approach is necessary. Thanks
Pandersen33 is offline   Reply With Quote
Old 04-28-2020, 03:32 PM   #2
37 Cab
Senior Member
 
37 Cab's Avatar
 
Join Date: Dec 2014
Location: Miami Oklahoma
Posts: 504
Default Re: Reverse eyed spring with Mitchell OD?

I have a Mitchell in my 37 with reversed springs. I made a box 1 inch higher than the tunnel for clearance. 1+ wider on both sides for side to side movement.
__________________
Tommy
37 Cab is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:50 PM.