The Ford Barn

guy1unico · 09-29-2014, 08:01 AM

I have to remove the rear end on my 33 . Are there any good books that show a step by step process?

A bones · 09-29-2014, 02:43 PM

Have you seen the thread that ends 09/26/14 10:29? Not a step by step, but....it does hit the high spots. good luck Tom

Zeke...PA · 09-29-2014, 04:07 PM

Try Les Andrews Model A Ford Mechanics Handbook rears are similar. Zeke

flat-v8 · 09-29-2014, 07:14 PM

I have a couple in MS word format that I used, helped alot! They are too big to post here but I could email to you, PM me with email address if interested.

supereal · 09-29-2014, 08:39 PM

The best all around shop manual for the novice mechanic is the Canadian book. Ford didn't produce a shop manual until the "new" Ford arrived in 1949. The Canadian book is available from a vendor such as C&G.

Bruce Lancaster · 09-29-2014, 08:53 PM

Sponsored Links (Register now to hide all advertisements)

Some '33-4 specs differ from later...this rear is covered in the '33 service bulletins, and overhauls stuff was included in '38 bulletins too. If you don't have at least the early bulletins you are working in the dark...they are a basic tool.
Another good book is the reprint of the old NAPA shop manual for '32-6...C&G calls the current edition:V-13
Repair Manual
32-36 Passenger & Pickup

R&R of the assembly isn't covered specifically but is fairly obvious, spring . brake rods, U-joint cover, etc.

Procedures are very similar for all the early rears, but there are differences and different specs for things like pinion preload...the families are '28-32, late '32-34, and '35-48. All are very well covered in the bulletins.

09-29-2014, 08:01 AM	#1
guy1unico Senior Member Join Date: May 2010 Location: Dallas Posts: 583	Books for axle / banjo rear removal I have to remove the rear end on my 33 . Are there any good books that show a step by step process?

09-29-2014, 02:43 PM	#2
A bones Senior Member Join Date: May 2010 Location: CLAYTON DE Posts: 1,283	Re: Books for axle / banjo rear removal Have you seen the thread that ends 09/26/14 10:29? Not a step by step, but....it does hit the high spots. good luck Tom

09-29-2014, 04:07 PM	#3
Zeke...PA Senior Member Join Date: May 2010 Location: Delta, PA Posts: 525	Re: Books for axle / banjo rear removal Try Les Andrews Model A Ford Mechanics Handbook rears are similar. Zeke __________________ Only problem with retirement is never a day off

09-29-2014, 07:14 PM	#4
flat-v8 Senior Member Join Date: Nov 2010 Location: Magnolia Texas Posts: 586	Re: Books for axle / banjo rear removal I have a couple in MS word format that I used, helped alot! They are too big to post here but I could email to you, PM me with email address if interested.

09-29-2014, 08:39 PM	#5
supereal Senior Member Join Date: Jul 2014 Location: Iowa Posts: 1,634	Re: Books for axle / banjo rear removal The best all around shop manual for the novice mechanic is the Canadian book. Ford didn't produce a shop manual until the "new" Ford arrived in 1949. The Canadian book is available from a vendor such as C&G.

09-29-2014, 08:53 PM	#6
Bruce Lancaster Member Emeritus Join Date: May 2010 Location: Madison, NJ Posts: 5,230	Re: Books for axle / banjo rear removal Sponsored Links (Register now to hide all advertisements) Some '33-4 specs differ from later...this rear is covered in the '33 service bulletins, and overhauls stuff was included in '38 bulletins too. If you don't have at least the early bulletins you are working in the dark...they are a basic tool. Another good book is the reprint of the old NAPA shop manual for '32-6...C&G calls the current edition:V-13 Repair Manual 32-36 Passenger & Pickup R&R of the assembly isn't covered specifically but is fairly obvious, spring . brake rods, U-joint cover, etc. Procedures are very similar for all the early rears, but there are differences and different specs for things like pinion preload...the families are '28-32, late '32-34, and '35-48. All are very well covered in the bulletins.