|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-16-2018, 07:03 AM | #1 |
Senior Member
Join Date: May 2010
Location: Stratham, NH
Posts: 233
|
35 Universal Joint Grease Cup Hole
I need info about the inner grease cup. The grease fitting for the universal joint
is located around 5 o"clock on the passenger side. The inner cup I would like to use has 2 holes in it. One of them is located very close to the fitting location and the other is at about 11 o"clock. Is the cup I have correct for my 35 application or do I need to find a cup that only has the one hole located near the fitting? |
08-16-2018, 07:20 AM | #2 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,094
|
Re: 35 Universal Joint Grease Cup Hole
Peter,
What you have will work just fine. |
Sponsored Links (Register now to hide all advertisements) |
|
08-16-2018, 08:55 AM | #3 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,923
|
Re: 35 Universal Joint Grease Cup Hole
DavidG is correct. I added a grease fitting for that 11 o,clock hole so I could grease the universal from inside the car. Probably overkill as universal joint isn't greased that often.
|
08-16-2018, 09:06 AM | #4 |
Senior Member
Join Date: May 2010
Location: Stratham, NH
Posts: 233
|
Re: 35 Universal Joint Grease Cup Hole
Thanks men for you timely responses.
Peter |
08-16-2018, 12:11 PM | #5 |
Senior Member
Join Date: May 2010
Location: upstate SC
Posts: 2,963
|
Re: 35 Universal Joint Grease Cup Hole
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|