|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-04-2014, 11:38 PM | #1 |
Senior Member
Join Date: Apr 2013
Location: Auckland
Posts: 115
|
34 Cabriolet door latches & window regulators
I'm going to be having to find door latch and window regulator units for a 1934 Cabriolet. Many of the usual suspects who supply us with parts have these items for various 1934 models, but do not specify units suitable for Cabriolets.
Does anyone know if any of these units specified for sedans, phaetons, or roadsters are also suitable for Cabriolets? And if they are not whether any of the above models' units can be adapted for Cabriolet use? Has anyone else solved this problem? |
06-05-2014, 04:15 AM | #2 |
Senior Member
Join Date: May 2010
Location: Altamont, NY
Posts: 1,004
|
Re: 34 Cabriolet door latches & window regulators
Well lets explain it this way, the door latches are the same as closed car 34, the window regulators are special to 33/34 cabriolet and not reproduced.
__________________
dickspadaro.com |
Sponsored Links (Register now to hide all advertisements) |
|
06-05-2014, 02:02 PM | #3 |
Senior Member
Join Date: Apr 2013
Location: Auckland
Posts: 115
|
Re: 34 Cabriolet door latches & window regulators
Thanks. Does anyone know if any of the other model window regulators can be modified to work in a cabriolet?
|
06-05-2014, 02:55 PM | #4 |
Senior Member
Join Date: May 2010
Location: Above the gnat line in Georgia
Posts: 7,009
|
Re: 34 Cabriolet door latches & window regulators
You will probably have to rebuild the ones you have. Sigh.
__________________
Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm". |
06-05-2014, 10:43 PM | #5 |
Senior Member
Join Date: May 2010
Location: charlottesville, Va.
Posts: 588
|
Re: 34 Cabriolet door latches & window regulators
You will need to find window regs from a 35-36 two door sedan. You will used the 34 cab. main plate with the six mounting screws that bolt to the door. You will remove the 35-36 parts from their plate and install them on your 34 plates. You will need to alter the arm lenght to match the 34 arm lenght. Good Luck
|
06-06-2014, 05:14 AM | #6 |
Senior Member
Join Date: May 2010
Posts: 4,725
|
Re: 34 Cabriolet door latches & window regulators
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|